[PATCH v3 04/36] mtd: st_spi_fsm: Supply framework for device requests

Brian Norris computersforpeace at gmail.com
Tue Dec 10 15:19:43 EST 2013


On Fri, Nov 29, 2013 at 12:18:53PM +0000, Lee Jones wrote:
> --- a/drivers/mtd/devices/st_spi_fsm.c
> +++ b/drivers/mtd/devices/st_spi_fsm.c
> @@ -46,6 +51,36 @@ static void stfsm_clear_fifo(struct stfsm *fsm)
>  	}
>  }
>  
> +static inline void stfsm_load_seq(struct stfsm *fsm,
> +				  const struct stfsm_seq *seq)
> +{
> +	void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE;
> +	const uint32_t *src = (const uint32_t *)seq;
> +	int words = STFSM_SEQ_SIZE / sizeof(uint32_t);

I think this is clearer as:

	int words = sizeof(*seq) / sizeof(*src);

> +
> +	BUG_ON(!stfsm_is_idle(fsm));
> +
> +	while (words--) {
> +		writel(*src, dst);
> +		src++;
> +		dst += 4;
> +	}
> +}
> +
> +static void stfsm_wait_seq(struct stfsm *fsm)
> +{
> +	unsigned long timeo = jiffies + HZ;
> +
> +	while (time_before(jiffies, timeo)) {
> +		if (stfsm_is_idle(fsm))
> +			return;
> +
> +		cond_resched();
> +	}
> +
> +	dev_err(fsm->dev, "timeout on sequence completion\n");

I believe the timeout logic is incorrect. What if we wait a "long time"
to call stfsm_wait_seq() (due to scheduling, or otherwise)? Then the
while loop might not even run once (time_before(x, y) is false). Or what
if cond_resched() waits for a long time...

So you need an extra check of stfsm_is_idle() after the while loop,
before you declare a timeout.

> +}
> +
>  static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode)
>  {
>  	int ret, timeout = 10;
> diff --git a/drivers/mtd/devices/st_spi_fsm.h b/drivers/mtd/devices/st_spi_fsm.h
> index 4e92e58..6164142 100644
> --- a/drivers/mtd/devices/st_spi_fsm.h
> +++ b/drivers/mtd/devices/st_spi_fsm.h
> @@ -199,4 +199,18 @@ struct stfsm {
>  	uint32_t		fifo_dir_delay;
>  };
>  
> +struct stfsm_seq {
> +	uint32_t data_size;
> +	uint32_t addr1;
> +	uint32_t addr2;
> +	uint32_t addr_cfg;
> +	uint32_t seq_opc[5];
> +	uint32_t mode;
> +	uint32_t dummy;
> +	uint32_t status;
> +	uint8_t  seq[16];
> +	uint32_t seq_cfg;
> +} __attribute__((__packed__, aligned(4)));

I think checkpatch.pl prefers these attributes use the kernel macros:

  struct stfsm_seq {
  ...
  } __packed __aligned(4);

> +#define STFSM_SEQ_SIZE sizeof(struct stfsm_seq)

If you agree with my earlier comment, you won't need this macro.

> +
>  #endif	/* ST_SPI_FSM_H */

Brian



More information about the linux-mtd mailing list