[PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation
Lee Jones
lee.jones at linaro.org
Tue Dec 3 06:31:56 EST 2013
On Tue, 03 Dec 2013, Linus Walleij wrote:
> On Mon, Dec 2, 2013 at 12:03 PM, Lee Jones <lee.jones at linaro.org> wrote:
> >> > +Optional properties:
> >> > + - st,syscfg : Phandle to boot-device system configuration registers
> >> > + - st,boot-device-reg : Address of the aforementioned boot-device register(s)
> >> > + - st,boot-device-spi : Expected boot-device value if booted via this device
> >> > +
> >> > +Example:
> >> > + spifsm: spifsm at fe902000{
> >> > + compatible = "st,spi-fsm";
> >> > + reg = <0xfe902000 0x1000>;
> >> > + reg-names = "spi-fsm";
> >> > + pinctrl-0 = <&pinctrl_fsm>;
> >> > + st,syscfg = <&syscfg_rear>;
> >> > + st,boot-device-reg = <0x958>;
> >> > + st,boot-device-spi = <0x1a>;
> >>
> >> I don't think we should encode any register offsets whatsoever in device
> >> tree but maybe that's just me. (Yes, Stephen will beat me up about
> >> pin control single, but I consider that a special case.)
> >>
> >> I would just put the last two things as #defines into the driver file(s)
> >> or - if it's related to other syscfg registers and varies with SoC incarnation,
> >> as a #define in a shared header for that syscfg thing.
> >
> > No can do. This isn't _this_ device's register offset, this is a
> > syscfg register offset which a) there is no driver to apply specific
> > register offsets to and b) are liable to change oversubsequent SoCs.
>
> So it can be in <linux/mfd/my-sysconfig-regs.h> as
> a
>
> #define MY_SYSCON_V1_BOOT_DEV_REG 0x958
> #define MY_SYSCON_V1_BOOT_DEV_SPI 0x1a
>
> The kernel should know which SoC is in use and
> act apropriately right?
And this have lots of machine_is() calls everywhere?
Sounds perfect. ;)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-mtd
mailing list