[PATCH v3 04/10] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2

[Huang Shijie]

When we use the ECC info which is get from the nand chip's datasheet,
we may have some freed oob area now.

This patch rewrites the gpmi_ecc_write_oob() to implement the ecc.write_oob().
We also update the comment for gpmi_hw_ecclayout.

Yes! We can support the JFFS2 for the SLC nand now.

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |   31 ++++++++++++++++++++++---------
 1 files changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 9c89e80..8d8a814 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -45,7 +45,10 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
 	.pattern	= scan_ff_pattern
 };
 
-/*  We will use all the (page + OOB). */
+/*
+ * We may change the layout if we can get the ECC info from the datasheet,
+ * else we will use all the (page + OOB).
+ */
 static struct nand_ecclayout gpmi_hw_ecclayout = {
 	.eccbytes = 0,
 	.eccpos = { 0, },
@@ -1263,14 +1266,24 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 static int
 gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
 {
-	/*
-	 * The BCH will use all the (page + oob).
-	 * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
-	 * But it can not stop some ioctls such MEMWRITEOOB which uses
-	 * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
-	 * these ioctls too.
-	 */
-	return -EPERM;
+	struct nand_oobfree *of = mtd->ecclayout->oobfree;
+	int status = 0;
+
+	/* Do we have available oob area? */
+	if (!of->length)
+		return -EPERM;
+
+	if (!nand_is_slc(chip))
+		return -EPERM;
+
+	pr_debug("page number is %d\n", page);
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
+	chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = chip->waitfunc(mtd, chip);
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
 }
 
 static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
-- 
1.7.1