[PATCH v2 3/9] mtd: print out the cell information for nand chip

[Ezequiel Garcia]

On Fri, Aug 23, 2013 at 10:58:21PM -0700, Brian Norris wrote:
> On Mon, Aug 19, 2013 at 10:31:12AM +0800, Huang Shijie wrote:
> > Print out the cell information for nand chip.
> > 
> > Signed-off-by: Huang Shijie <b32955 at freescale.com>
> > ---
> >  drivers/mtd/nand/nand_base.c |    5 +++--
> >  1 files changed, 3 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> > index 69c4b25..8b487d5 100644
> > --- a/drivers/mtd/nand/nand_base.c
> > +++ b/drivers/mtd/nand/nand_base.c
> > @@ -3454,10 +3454,11 @@ ident_done:
> >  		chip->cmdfunc = nand_command_lp;
> >  
> >  	pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
> > -		" %dMiB, page size: %d, OOB size: %d\n",
> > +		" %dMiB, %s, page size: %d, OOB size: %d\n",
> >  		*maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
> >  		chip->onfi_version ? chip->onfi_params.model : type->name,
> > -		(int)(chip->chipsize >> 20), mtd->writesize, mtd->oobsize);
> > +		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
> > +		mtd->writesize, mtd->oobsize);
> 
> This message is getting mighty long (approx. 120 characters when
> printed). Are you sure we need all this? Maybe split into two separate
> pr_info's sometime. But I'm OK with merging this for now.
> 

Hm.. well, although it's still a two-line message, I also don't like
to see this growing.

I think we should try to answer: why would anyone want to see any of
this when the kernel boots?

So maybe we should pr_info only the most important information,
and then either: 1) pr_debug the rest, or 2) show it in some debugfs files.

PS: Can't avoid thinking of Eric Raymond's rule of *silence* :-)
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com