[PATCH V1 3/5] mtd: m25p80: add the quad-read support

Huang Shijie b32955 at freescale.com
Fri Aug 23 02:26:28 EDT 2013


于 2013年08月23日 03:55, Mark Brown 写道:
> On Thu, Aug 22, 2013 at 12:34:53PM -0700, Brian Norris wrote:
>> On Mon, Aug 19, 2013 at 12:10:01PM +0800, Huang Shijie wrote:
>
>> Why can't this be detected at runtime? We added a "no fast read" flag to
>> the device table, so why not "dual/quad mode supported"? And believe it
>> or not, not all m25p80 users have device tree. So it isn't very logical
>> to tie this support to device-tree only.
>
Hi Brian:
My only question here is do we need to add some flags , such as "quad
read", to
the device table? If you think we need to, i will add a patch for it.

(Just as Brown said, when the DTS configurates the "m25p,quad-read"
property, it
means : Both the board and the NOR support the Quad read.)


>> What you're really missing from device-tree (and the SPI subystem in
>> general) is how to detect those SPI controllers which support dual and
>> quad mode transfers, and how to communicate that a particular SPI
>> transaction should be performed on 1 or 4 IO lines. We shouldn't have
>> this just hacked in via assumptions.
> That bit does need to be fixed in this driver, yes.  The SPI core now
> has quad mode support.
yes, i do not need these bits in this driver.


thanks
Huang Shijie





More information about the linux-mtd mailing list