[PATCH v4 0/6] Export the ECC step size to user applications

[Huang Shijie]

On Sat, Aug 17, 2013 at 11:35:28AM -0700, Brian Norris wrote:
> Hi Huang,
> 
> On Fri, Aug 16, 2013 at 10:10:03AM +0800, Huang Shijie wrote:
> > In order to implement the NAND boot for some Freescale's chips, such as
> > imx23/imx28/imx50/imx6, we use a tool (called kobs-ng) to burn the uboot
> > and some metadata to nand chip. And the ROM code will use the metadata to
> > configrate the BCH, and to find the uboot.
> >
> > The ECC information(ecc step size, ecc strength) which is used to configrate
> > the BCH is part of the metadata. The kobs-ng can gets the ecc strength from
> > the sys node /sys/*/mtdX/ecc_strength now. But it can't gets the ecc step size.
> >
> > This patch set is used to export the ecc step size to user applications.
> > With this patch set, the kobs-ng can gets the ecc step size now.
> >
> > v3 --> v4:
> > [1] rename the ecc_step to ecc_step_size.
> >
> > v2 --> v3:
> > [1] replace the nand_scan() with nand_scan_ident()/nand_scan_tail(),
> >    Let the MTD layer to do the initialization for the ECC info.
> >    removed some hack code.
> > [2] move the ONFI nand's hooks in nand_set_defaults().
> > [3] change the comments.
> > [4] misc
> >
> > v1 --> v2:
> > [1] rename the ecc_size to ecc_step.
> > [2] rebase on the latest l2-mtd.
> >
> > Huang Shijie (6):
> >   mtd: add a new field to mtd_info{}
> >   mtd: add a new sys node to show the ecc step size
> >   mtd: set the ecc step size for master/slave mtd_info
> >   mtd: set ONFI nand's default hooks in nand_set_defaults()
> >   mtd: gpmi: remove the nand_scan()
> >   mtd: update the ABI document about the ecc step size
> >
> >  Documentation/ABI/testing/sysfs-class-mtd |   10 ++++
> >  drivers/mtd/mtdcore.c                     |   11 +++++
> >  drivers/mtd/mtdpart.c                     |    1 +
> >  drivers/mtd/nand/gpmi-nand/gpmi-nand.c    |   65 +++++++++++++++-------------
> >  drivers/mtd/nand/nand_base.c              |   13 +++---
> >  include/linux/mtd/mtd.h                   |    3 +
> >  6 files changed, 67 insertions(+), 36 deletions(-)
> 
> I think we're still missing updates for a few drivers, which probably
> shouldn't have mtd->ecc_step_size == 0. For instance,
> nand/alauda.c and maybe a few others. Can you take a pass at them,
okay.  I will check it right now, and send them a email.


thanks
Huang Shijie
> Huang? Perhaps take a guess at their step size and CC relevant author(s).
> If no one cares, then maybe they can stay as zero.
> 
> Anyway, I pushed the whole series, including my edits to patch 6. I will
> amend if there are more comments.
> 
> Thanks,
> Brian
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/