[PATCH v4 3/6] mtd: set the ecc step size for master/slave mtd_info

[Huang Shijie]

Set the ecc step size for master/slave mtd_info{}.

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 drivers/mtd/mtdpart.c        |    1 +
 drivers/mtd/nand/nand_base.c |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 3014933..6e732c3 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -516,6 +516,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 	}
 
 	slave->mtd.ecclayout = master->ecclayout;
+	slave->mtd.ecc_step_size = master->ecc_step_size;
 	slave->mtd.ecc_strength = master->ecc_strength;
 	slave->mtd.bitflip_threshold = master->bitflip_threshold;
 
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8f04fb0..fa35699 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3788,6 +3788,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* propagate ecc info to mtd_info */
 	mtd->ecclayout = chip->ecc.layout;
 	mtd->ecc_strength = chip->ecc.strength;
+	mtd->ecc_step_size = chip->ecc.size;
 	/*
 	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
 	 * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
-- 
1.7.1