[PATCH v4 08/14] mtd: nand: pxa3xx: Remove hardcoded mtd name

[Brian Norris]

On Mon, Aug 12, 2013 at 02:14:53PM -0300, Ezequiel Garcia wrote:
> There's no advantage in using a hardcoded name for the mtd device.
> Instead use the provided by the platform_device.
> 
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
> Tested-by: Daniel Mack <zonque at gmail.com>
> ---
>  drivers/mtd/nand/pxa3xx_nand.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 17a3e2c..5bbb8b8 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -244,8 +244,6 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
>  /* Define a default flash type setting serve as flash detecting only */
>  #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
>  
> -const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL};
> -
>  #define NDTR0_tCH(c)	(min((c), 7) << 19)
>  #define NDTR0_tCS(c)	(min((c), 7) << 16)
>  #define NDTR0_tWH(c)	(min((c), 7) << 11)
> @@ -1091,8 +1089,6 @@ KEEP_CONFIG:
>  		host->row_addr_cycles = 3;
>  	else
>  		host->row_addr_cycles = 2;
> -
> -	mtd->name = mtd_names[0];
>  	return nand_scan_tail(mtd);
>  }
>  
> @@ -1314,6 +1310,8 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
>  	probe_success = 0;
>  	for (cs = 0; cs < pdata->num_cs; cs++) {
>  		struct mtd_info *mtd = info->host[cs]->mtd;
> +
> +		mtd->name = pdev->name;

I notice a potential improvement here: use dev_name(&pdev->dev) instead of
pdev->name. There is slight difference between the two, I think, where
dev_name() will have automatically append an index suffix (i.e.,
"pxa3xx-nand.0") whereas pdev->name may just be "pxa3xx-nand".

If that tests out fine for you, just submit a follow-up patch. Or maybe I'm
wrong about pdev->name vs. dev_name(). Either way, it's not worth a series
resend.

>  		info->cs = cs;
>  		ret = pxa3xx_nand_scan(mtd);
>  		if (ret) {

Thanks,
Brian