[PATCH v3 4/6] mtd: set ONFI nand's default hooks in nand_set_defaults()

[Huang Shijie]

We may do some ONFI get/set features operations before we call the
nand_scan_tail().

So move the default ONFI nand hooks into nand_set_defaults().

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 drivers/mtd/nand/nand_base.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 6e4095d..ff605c8 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2794,6 +2794,12 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 	if (!chip->select_chip)
 		chip->select_chip = nand_select_chip;
 
+	/* set for ONFI nand */
+	if (!chip->onfi_set_features)
+		chip->onfi_set_features = nand_onfi_set_features;
+	if (!chip->onfi_get_features)
+		chip->onfi_get_features = nand_onfi_get_features;
+
 	/* If called twice, pointers that depend on busw may need to be reset */
 	if (!chip->read_byte || chip->read_byte == nand_read_byte)
 		chip->read_byte = busw ? nand_read_byte16 : nand_read_byte;
@@ -3560,12 +3566,6 @@ int nand_scan_tail(struct mtd_info *mtd)
 	if (!chip->write_page)
 		chip->write_page = nand_write_page;
 
-	/* set for ONFI nand */
-	if (!chip->onfi_set_features)
-		chip->onfi_set_features = nand_onfi_set_features;
-	if (!chip->onfi_get_features)
-		chip->onfi_get_features = nand_onfi_get_features;
-
 	/*
 	 * Check ECC mode, default to software if 3byte/512byte hardware ECC is
 	 * selected and we have 256 byte pagesize fallback to software ECC
-- 
1.7.1