[PATCH] mtd: atmel_nand: use the new ONFI parameters, ecc_strength_ds & ecc_step_ds

Josh Wu josh.wu at atmel.com
Fri Aug 9 04:56:45 EDT 2013


commit d99650181 (mtd: get the ECC info from the parameter page for ONFI nand)
will get ecc_strength_ds and ecc_step_ds during ONFI detecting.
So we can use them directly and remove our own get_onfi_ecc_param function.

Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
 drivers/mtd/nand/atmel_nand.c |   36 ++++--------------------------------
 1 file changed, 4 insertions(+), 32 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 0e365da..162161b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1062,30 +1062,6 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
 }
 
 /*
- * Get ECC requirement in ONFI parameters, returns -1 if ONFI
- * parameters is not supported.
- * return 0 if success to get the ECC requirement.
- */
-static int get_onfi_ecc_param(struct nand_chip *chip,
-		int *ecc_bits, int *sector_size)
-{
-	*ecc_bits = *sector_size = 0;
-
-	if (chip->onfi_params.ecc_bits == 0xff)
-		/* TODO: the sector_size and ecc_bits need to be find in
-		 * extended ecc parameter, currently we don't support it.
-		 */
-		return -1;
-
-	*ecc_bits = chip->onfi_params.ecc_bits;
-
-	/* The default sector size (ecc codeword size) is 512 */
-	*sector_size = 512;
-
-	return 0;
-}
-
-/*
  * Get ecc requirement from ONFI parameters ecc requirement.
  * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function
  * will set them according to ONFI ecc requirement. Otherwise, use the
@@ -1096,19 +1072,15 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
 		int *cap, int *sector_size)
 {
 	/* Get ECC requirement from ONFI parameters */
-	*cap = *sector_size = 0;
 	if (host->nand_chip.onfi_version) {
-		if (!get_onfi_ecc_param(&host->nand_chip, cap, sector_size))
-			dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n",
+		*cap = host->nand_chip.ecc_strength_ds;
+		*sector_size = host->nand_chip.ecc_step_ds;
+		dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n",
 				*cap, *sector_size);
-		else
-			dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n");
 	} else {
-		dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes");
-	}
-	if (*cap == 0 && *sector_size == 0) {
 		*cap = 2;
 		*sector_size = 512;
+		dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes");
 	}
 
 	/* If dts file doesn't specify then use the one in ONFI parameters */
-- 
1.7.9.5




More information about the linux-mtd mailing list