[PATCH v2 08/14] mtd: nand: pxa3xx: Remove uneeded internal cmdset

Ezequiel Garcia ezequiel.garcia at free-electrons.com
Wed Aug 7 08:31:13 EDT 2013


Use the defined macros for NAND command instead of using a constant
internal structure. This commit is only a cleanup, there's no
functionality modification.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 drivers/mtd/nand/pxa3xx_nand.c                | 63 ++++++++-------------------
 include/linux/platform_data/mtd-nand-pxa3xx.h | 13 ------
 2 files changed, 17 insertions(+), 59 deletions(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 122e77c..9f6e21a 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -131,7 +131,6 @@ enum pxa3xx_nand_variant {
 
 struct pxa3xx_nand_host {
 	struct nand_chip	chip;
-	struct pxa3xx_nand_cmdset *cmdset;
 	struct mtd_info         *mtd;
 	void			*info_data;
 
@@ -205,23 +204,6 @@ static bool use_dma = 1;
 module_param(use_dma, bool, 0444);
 MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
 
-/*
- * Default NAND flash controller configuration setup by the
- * bootloader. This configuration is used only when pdata->keep_config is set
- */
-static struct pxa3xx_nand_cmdset default_cmdset = {
-	.read1		= 0x3000,
-	.read2		= 0x0050,
-	.program	= 0x1080,
-	.read_status	= 0x0070,
-	.read_id	= 0x0090,
-	.erase		= 0xD060,
-	.reset		= 0x00FF,
-	.lock		= 0x002A,
-	.unlock		= 0x2423,
-	.lock_status	= 0x007A,
-};
-
 static struct pxa3xx_nand_timing timing[] = {
 	{ 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
 	{ 10,  0, 20,  40, 30,  40, 11123, 110, 10, },
@@ -521,7 +503,6 @@ static inline int is_buf_blank(uint8_t *buf, size_t len)
 static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
 		uint16_t column, int page_addr)
 {
-	uint16_t cmd;
 	int addr_cycle, exec_cmd;
 	struct pxa3xx_nand_host *host;
 	struct mtd_info *mtd;
@@ -571,21 +552,17 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
 	switch (command) {
 	case NAND_CMD_READOOB:
 	case NAND_CMD_READ0:
-		cmd = host->cmdset->read1;
+		info->buf_start = column;
+		info->ndcb0 |= NDCB0_CMD_TYPE(0)
+				| addr_cycle
+				| NAND_CMD_READ0;
+
 		if (command == NAND_CMD_READOOB)
-			info->buf_start = mtd->writesize + column;
-		else
-			info->buf_start = column;
+			info->buf_start += mtd->writesize;
 
-		if (unlikely(host->page_size < PAGE_CHUNK_SIZE))
-			info->ndcb0 |= NDCB0_CMD_TYPE(0)
-					| addr_cycle
-					| (cmd & NDCB0_CMD1_MASK);
-		else
-			info->ndcb0 |= NDCB0_CMD_TYPE(0)
-					| NDCB0_DBC
-					| addr_cycle
-					| cmd;
+		/* Second command setting for large pages */
+		if (host->page_size >= PAGE_CHUNK_SIZE)
+			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
 
 	case NAND_CMD_SEQIN:
 		/* small page addr setting */
@@ -616,62 +593,58 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
 			break;
 		}
 
-		cmd = host->cmdset->program;
 		info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
 				| NDCB0_AUTO_RS
 				| NDCB0_ST_ROW_EN
 				| NDCB0_DBC
-				| cmd
+				| (NAND_CMD_PAGEPROG << 8)
+				| NAND_CMD_SEQIN
 				| addr_cycle;
 		break;
 
 	case NAND_CMD_PARAM:
-		cmd = NAND_CMD_PARAM;
 		info->buf_count = 256;
 		info->ndcb0 |= NDCB0_CMD_TYPE(0)
 				| NDCB0_ADDR_CYC(1)
 				| NDCB0_LEN_OVRD
-				| cmd;
+				| command;
 		info->ndcb1 = (column & 0xFF);
 		info->ndcb3 = 256;
 		info->data_size = 256;
 		break;
 
 	case NAND_CMD_READID:
-		cmd = host->cmdset->read_id;
 		info->buf_count = host->read_id_bytes;
 		info->ndcb0 |= NDCB0_CMD_TYPE(3)
 				| NDCB0_ADDR_CYC(1)
-				| cmd;
+				| command;
 		info->ndcb1 = (column & 0xFF);
 
 		info->data_size = 8;
 		break;
 	case NAND_CMD_STATUS:
-		cmd = host->cmdset->read_status;
 		info->buf_count = 1;
 		info->ndcb0 |= NDCB0_CMD_TYPE(4)
 				| NDCB0_ADDR_CYC(1)
-				| cmd;
+				| command;
 
 		info->data_size = 8;
 		break;
 
 	case NAND_CMD_ERASE1:
-		cmd = host->cmdset->erase;
 		info->ndcb0 |= NDCB0_CMD_TYPE(2)
 				| NDCB0_AUTO_RS
 				| NDCB0_ADDR_CYC(3)
 				| NDCB0_DBC
-				| cmd;
+				| (NAND_CMD_ERASE2 << 8)
+				| NAND_CMD_ERASE1;
 		info->ndcb1 = page_addr;
 		info->ndcb2 = 0;
 
 		break;
 	case NAND_CMD_RESET:
-		cmd = host->cmdset->reset;
 		info->ndcb0 |= NDCB0_CMD_TYPE(5)
-				| cmd;
+				| command;
 
 		break;
 
@@ -867,7 +840,6 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 	}
 
 	/* calculate flash information */
-	host->cmdset = &default_cmdset;
 	host->page_size = f->page_size;
 	host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
 
@@ -913,7 +885,6 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
 	}
 
 	host->reg_ndcr = ndcr & ~NDCR_INT_MASK;
-	host->cmdset = &default_cmdset;
 
 	host->ndtr0cs0 = nand_readl(info, NDTR0CS0);
 	host->ndtr1cs0 = nand_readl(info, NDTR1CS0);
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index c42f39f..ffb8019 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -16,19 +16,6 @@ struct pxa3xx_nand_timing {
 	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
 };
 
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
 struct pxa3xx_nand_flash {
 	char		*name;
 	uint32_t	chip_id;
-- 
1.8.1.5




More information about the linux-mtd mailing list