[v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm

Sekhar Nori nsekhar at ti.com
Tue Apr 30 01:05:42 EDT 2013


On 4/29/2013 1:25 PM, Gupta, Pekon wrote:
> From: avinash philip <avinashphilip at ti.com>
> 
> NAND flash connected in am335x-evm on GPMC controller. This patch adds
> device tree node in am3355-evm with GPMC contoller timing for NAND flash
> interface, NAND partition table, ECC scheme, elm handle id.
> 
> Signed-off-by: Philip Avinash <avinashphilip at ti.com>
> Tested-by: Pekon Gupta <pekon at ti.com>
> 
> ---
> arch/arm/boot/dts/am335x-evm.dts |   98 +++++++++++++++++++++++++++++++++++++-
>  1 file changed, 97 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 0423298..1c2fd89 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -26,7 +26,8 @@
>  
>  	am33xx_pinmux: pinmux at 44e10800 {
>  		pinctrl-names = "default";
> -		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
> +		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0
> +			&nandflash_pins_s0>;

Why add this to the board level fallback (called pinctrl hogs, I think)?
This can be part of nand node you added below so that the pinctrl will
take effect when nand gets probed instead of all the time.

Thanks,
Sekhar



More information about the linux-mtd mailing list