[PATCH 00/11] mtd: add datasheet's ECC information to nand_chip{}

[Artem Bityutskiy]

On Mon, 2013-03-18 at 19:18 +0800, Huang Shijie wrote:
> 1.) Why add the ECC information to the nand_chip{} ?
>    Each nand chip has its requirement for the ECC correctability, such as
>    "4bit ECC for each 512Byte" or "40bit ECC for each 1024Byte".
>    This ECC info is very important to the nand controller, such as gpmi.

Unfortunately no-one reviewed your patches. Let me CC Brian.

I've pushed patches 1-3 to l2-mtd.git so far.

-- 
Best Regards,
Artem Bityutskiy