[PATCH v2 3/3] mtd: nand: reword nand_chip bad block interface comments
Brian Norris
computersforpeace at gmail.com
Thu Apr 11 04:34:59 EDT 2013
This remedies a few problems:
(1) The use of "the" vs. "a" is a little confusing, IMO.
(2) nand_chip.block_bad is used exclusively for checking the OOB bad
block markers of a NAND. Any BBT functionality is handled in
nand_bbt.c, so this description should differentiate itself from
nand_bbt.c.
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
v2: no change
include/linux/mtd/nand.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 6184cc0..2126837 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -392,8 +392,8 @@ struct nand_buffers {
* @write_buf: [REPLACEABLE] write data from the buffer to the chip
* @read_buf: [REPLACEABLE] read data from the chip into the buffer
* @select_chip: [REPLACEABLE] select chip nr
- * @block_bad: [REPLACEABLE] check, if the block is bad
- * @block_markbad: [REPLACEABLE] mark the block bad
+ * @block_bad: [REPLACEABLE] check if a block is bad, using OOB markers
+ * @block_markbad: [REPLACEABLE] mark a block bad
* @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling
* ALE/CLE/nCE. Also used to write command and address
* @init_size: [BOARDSPECIFIC] hardwarespecific function for setting
--
1.8.2
More information about the linux-mtd
mailing list