[PATCH] mtd: chips: Add support for PMC SPI Flash chips in m25p80.c
Michel Stempin
michel.stempin at wanadoo.fr
Thu Apr 4 05:40:55 EDT 2013
Add support for PMC (now Chingis, part of ISSI) Pm25LV512 (512 kBbit), Pm25LV010 (1 Mbit) (see datasheet http://www.geocities.jp/scottle556/pdf/Pm25LV512-010.pdf) and Pm25LQ032 (32 Mbit) (datasheet:http://www.chingistek.com/img/Product_Files/Pm25LQ032C%20datasheet%20v1.6.1.pdf) SPI Flash chips, used in various WiFi pocket routers.
Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
Signed-off-by: Michel Stempin <michel.stempin at wanadoo.fr>
--
b/drivers/mtd/devices/m25p80.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 5b6b072..5fd7500 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -45,6 +45,7 @@
#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */
+#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips*/
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
@@ -681,6 +682,7 @@ struct flash_info {
u16 flags;
#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
#define M25P_NO_ERASE 0x02 /* No erase command needed */
+#define SECT_4K_PMC 0x04 /* OPCODE_BE_4K_PMC works uniformly */
};
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
@@ -759,6 +761,11 @@ static const struct spi_device_id m25p_ids[] = {
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
+ { "pm25lq032", INFO(0x7F9D46, 0, 64 * 1024, 64, SECT_4K) },
+
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
@@ -1009,6 +1016,9 @@ static int m25p_probe(struct spi_device *spi)
if (info->flags & SECT_4K) {
flash->erase_opcode = OPCODE_BE_4K;
flash->mtd.erasesize = 4096;
+ } else if (info->flags & SECT_4K_PMC) {
+ flash->erase_opcode = OPCODE_BE_4K_PMC;
+ flash->mtd.erasesize = 4096;
} else {
flash->erase_opcode = OPCODE_SE;
flash->mtd.erasesize = info->sector_size;
More information about the linux-mtd
mailing list