[PATCH] mtd: nand: Rename create_bbt()'s 'len' variable to 'numpages'

Shmulik Ladkani shmulik.ladkani at gmail.com
Sat Sep 22 14:54:47 EDT 2012


Ping.

On Mon, 20 Aug 2012 16:29:15 +0300 Shmulik Ladkani <shmulik.ladkani at gmail.com> wrote:
> Rename 'len' variable of create_bbt/scan_block_fast/scan_block_full to
> 'numpages', since it really means number of pages to scan when
> searching for the BBM (and not the byte length of the scan).
> 
> Signed-off-by: Shmulik Ladkani <shmulik.ladkani at gmail.com>
> ---
> diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
> index 9a5402e..24b0a4c 100644
> --- a/drivers/mtd/nand/nand_bbt.c
> +++ b/drivers/mtd/nand/nand_bbt.c
> @@ -401,7 +401,7 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
>  /* Scan a given block full */
>  static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
>  			   loff_t offs, uint8_t *buf, size_t readlen,
> -			   int scanlen, int len)
> +			   int scanlen, int numpages)
>  {
>  	int ret, j;
>  
> @@ -410,7 +410,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
>  	if (ret && !mtd_is_bitflip_or_eccerr(ret))
>  		return ret;
>  
> -	for (j = 0; j < len; j++, buf += scanlen) {
> +	for (j = 0; j < numpages; j++, buf += scanlen) {
>  		if (check_pattern(buf, scanlen, mtd->writesize, bd))
>  			return 1;
>  	}
> @@ -419,7 +419,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
>  
>  /* Scan a given block partially */
>  static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
> -			   loff_t offs, uint8_t *buf, int len)
> +			   loff_t offs, uint8_t *buf, int numpages)
>  {
>  	struct mtd_oob_ops ops;
>  	int j, ret;
> @@ -430,7 +430,7 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
>  	ops.datbuf = NULL;
>  	ops.mode = MTD_OPS_PLACE_OOB;
>  
> -	for (j = 0; j < len; j++) {
> +	for (j = 0; j < numpages; j++) {
>  		/*
>  		 * Read the full oob until read_oob is fixed to handle single
>  		 * byte reads for 16 bit buswidth.
> @@ -463,7 +463,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
>  	struct nand_bbt_descr *bd, int chip)
>  {
>  	struct nand_chip *this = mtd->priv;
> -	int i, numblocks, len, scanlen;
> +	int i, numblocks, numpages, scanlen;
>  	int startblock;
>  	loff_t from;
>  	size_t readlen;
> @@ -471,11 +471,11 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
>  	pr_info("Scanning device for bad blocks\n");
>  
>  	if (bd->options & NAND_BBT_SCANALLPAGES)
> -		len = 1 << (this->bbt_erase_shift - this->page_shift);
> +		numpages = 1 << (this->bbt_erase_shift - this->page_shift);
>  	else if (bd->options & NAND_BBT_SCAN2NDPAGE)
> -		len = 2;
> +		numpages = 2;
>  	else
> -		len = 1;
> +		numpages = 1;
>  
>  	if (!(bd->options & NAND_BBT_SCANEMPTY)) {
>  		/* We need only read few bytes from the OOB area */
> @@ -484,7 +484,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
>  	} else {
>  		/* Full page content should be read */
>  		scanlen = mtd->writesize + mtd->oobsize;
> -		readlen = len * mtd->writesize;
> +		readlen = numpages * mtd->writesize;
>  	}
>  
>  	if (chip == -1) {
> @@ -508,7 +508,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
>  	}
>  
>  	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
> -		from += mtd->erasesize - (mtd->writesize * len);
> +		from += mtd->erasesize - (mtd->writesize * numpages);
>  
>  	for (i = startblock; i < numblocks;) {
>  		int ret;
> @@ -517,9 +517,9 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
>  
>  		if (bd->options & NAND_BBT_SCANALLPAGES)
>  			ret = scan_block_full(mtd, bd, from, buf, readlen,
> -					      scanlen, len);
> +					      scanlen, numpages);
>  		else
> -			ret = scan_block_fast(mtd, bd, from, buf, len);
> +			ret = scan_block_fast(mtd, bd, from, buf, numpages);
>  
>  		if (ret < 0)
>  			return ret;




More information about the linux-mtd mailing list