[PATCH 1/3] mtd: cmdlinepart: make the partitions rule more strict

[Huang Shijie]

On Mon, Sep 3, 2012 at 3:18 AM, Artem Bityutskiy <dedekind1 at gmail.com> wrote:
> On Sun, 2012-08-26 at 13:21 -0400, Huang Shijie wrote:
>> + *
>> + * Note:
>> + * If you choose to set the @offset for the <partdef>, please set all
>> + * the partitions with the same syntax, such as:
>> + *     gpmi-nand:100m at 0(boot),100m at 100m(kernel),1g at 200m(rootfs)
>> + *
>> + * Please do _NOT_ set the partitions like this:
>> + *     gpmi-nand:100m at 0(boot),100m(kernel),1g at 200m(rootfs)
>> + * The `kernel` partition does not set with the @offset, this is not permitted.
>>   */
>
> I guess it is indeed OK to sort the partitions, just makes things a lot
> simpler. But we probably then should also do the following:
>
> 1. Make sure there is only one partition without offset. If there are
> several - error out.

 Why allow `only one partition without offset`?

Take the following unsorted partitions as an example:
     #gpmi-nand:1g at 200m(rootfs),100m(boot),100m at 100m(kernel)

The current code will parses out the following partitions:
      rootfs: < size = 1g, offset=200m>
      boot:   < size = 100m, offset= OFFSET_CONTINOUS>
      kernel: <size = 100m, offset = 100m>

If we sort the partitions by the offset, we get the following result:
     "kernel" , "rootfs", "boot"

In actually, we expect the following result:
    "boot", "kernel", "rootfs"

What's your idea about this issue?
In my opinion, we should forbid the mixed type.

thanks
Huang Shijie







> 2. Check that partitions do not intersect - I did not notice that we do
> this in the code.
>
> So AFAICS, this patch is not needed and we better have the following
> patches:
>
> 1. Add sorting
> 2. Add a check that partitions do not overlap and there is only one
> offset-less partition.
>
> How does this sound?
>
> --
> Best Regards,
> Artem Bityutskiy