[PATCH] nand_wait_ready timeout fix

[Matthieu CASTET]

nand_wait_ready timeout should not assume HZ=100.
Make it independent of HZ value by using msecs_to_jiffies.

Signed-off-by: Matthieu CASTET <matthieu.castet at parrot.com>
---
 drivers/mtd/nand/nand_base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1a03b7f..16e95e7 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -492,7 +492,7 @@ static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
 void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
-	unsigned long timeo = jiffies + 2;
+	unsigned long timeo = jiffies + msecs_to_jiffies(20);
 
 	/* 400ms timeout */
 	if (in_interrupt() || oops_in_progress)
-- 
1.7.10.4