[RFC/PATCH] mtd_blkdevs: Replace request handler kthread with a workqueue

[Artem Bityutskiy]

On Sat, 2012-11-10 at 13:08 -0300, Ezequiel Garcia wrote:
> By replacing a kthread with a workqueue, the code is now a bit clearer.
> There's also a slight reduction of code size (numbers apply for x86):
> Before:
>    text	   data	    bss	    dec	    hex	filename
>    3248	     36	      0	   3284	    cd4	drivers/mtd/mtd_blkdevs.o
> 
> After:
>    text	   data	    bss	    dec	    hex	filename
>    3150	     36	      0	   3186	    c72	drivers/mtd/mtd_blkdevs.o
> 
> Due to lack of real hardware, tests have been performed on an emulated
> environment with mtdswap and mtdblock over nandsim devices.
> Some real testing should be done, before merging this patch.

Looks good to me, thanks, pushed to l2-mtd.git.

-- 
Best Regards,
Artem Bityutskiy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20121121/036ecc8c/attachment.sig>