[PATCH 1/3] mtd nand : onfi need to be probed in 8 bits mode

Matthieu CASTET matthieu.castet at parrot.com
Tue Nov 6 05:51:43 EST 2012


- NAND_CMD_READID want an address that it is not scaled on x16 device (it is always 0x20)
- NAND_CMD_PARAM want 8 bits data

Signed-off-by: Matthieu CASTET <matthieu.castet at parrot.com>
---
 drivers/mtd/nand/nand_base.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5894c2c..abeb8e9 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2851,6 +2851,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	int i;
 	int val;
 
+	/* ONFI need to be probed in 8 bits mode */
+	WARN_ON(chip->options & NAND_BUSWIDTH_16);
 	/* Try ONFI for unknown chip or LP */
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
 	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
-- 
1.7.10.4




More information about the linux-mtd mailing list