[PATCH v4 6/8] mtd: sh_flctl: Group sector accesses into a single transfer
Bastian Hecht
hechtb at googlemail.com
Mon May 14 08:14:45 EDT 2012
When we use hardware ecc, the flctl is run in so-called "sector access
mode". We can bundle 4 sector accesses when using 2k page sizes to read
a whole page at once and speed up things.
Signed-off-by: Bastian Hecht <hechtb at gmail.com>
---
drivers/mtd/nand/sh_flctl.c | 44 ++++++++++++++++++------------------------
1 files changed, 19 insertions(+), 25 deletions(-)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index b28b53f..9de4225 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -368,25 +368,21 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
struct sh_flctl *flctl = mtd_to_flctl(mtd);
int sector, page_sectors;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
+ page_sectors = flctl->page_size ? 4 : 1;
+
+ set_cmd_regs(mtd, NAND_CMD_READ0,
+ (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+ empty_fifo(flctl);
+ start_translation(flctl);
for (sector = 0; sector < page_sectors; sector++) {
int ret;
-
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
-
- start_translation(flctl);
read_fiforeg(flctl, 512, 512 * sector);
ret = read_ecfiforeg(flctl,
@@ -397,8 +393,10 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
flctl->hwecc_cant_correct[sector] = 1;
writel(0x0, FL4ECCCR(flctl));
- wait_completion(flctl);
}
+
+ wait_completion(flctl);
+
writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
FLCMNCR(flctl));
}
@@ -430,31 +428,27 @@ static void execmd_write_page_sector(struct mtd_info *mtd)
int i, page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ page_sectors = flctl->page_size ? 4 : 1;
set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
- for (sector = 0; sector < page_sectors; sector++) {
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
+ empty_fifo(flctl);
+ writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
+ start_translation(flctl);
- start_translation(flctl);
+ for (sector = 0; sector < page_sectors; sector++) {
write_fiforeg(flctl, 512, 512 * sector);
for (i = 0; i < 4; i++) {
wait_wecfifo_ready(flctl); /* wait for write ready */
writel(0xFFFFFFFF, FLECFIFO(flctl));
}
- wait_completion(flctl);
}
+ wait_completion(flctl);
writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
}
--
1.7.5.4
More information about the linux-mtd
mailing list