[PATCH] mtd: nand: fixup 1/0 vs. true/false
Brian Norris
computersforpeace at gmail.com
Thu May 3 18:30:08 EDT 2012
The 'oob_required' argument is an int, according to the boolean style used in
nand_base.c, so we should use 1 and 0 instead of true and false.
Thanks Mike for spotting this.
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
Cc: Mike Dunn <mikedunn at newsguy.com>
Cc: Shmulik Ladkani <shmulik.ladkani at gmail.com>
---
drivers/mtd/nand/bcm_umi_nand.c | 2 +-
drivers/mtd/nand/docg4.c | 4 ++--
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index c6d691a..c855e7c 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -341,7 +341,7 @@ static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf,
* for MLC parts which may have permanently stuck bits.
*/
struct nand_chip *chip = mtd->priv;
- int ret = chip->ecc.read_page(mtd, chip, readbackbuf, false, 0);
+ int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0, 0);
if (ret < 0)
return -EFAULT;
else {
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index 16221b2..1f8485d 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -1003,7 +1003,7 @@ static int __init read_factory_bbt(struct mtd_info *mtd)
return -ENOMEM;
read_page_prologue(mtd, g4_addr);
- status = docg4_read_page(mtd, nand, buf, false, DOCG4_FACTORY_BBT_PAGE);
+ status = docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
if (status)
goto exit;
@@ -1080,7 +1080,7 @@ static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* write first page of block */
write_page_prologue(mtd, g4_addr);
- docg4_write_page(mtd, nand, buf, true);
+ docg4_write_page(mtd, nand, buf, 1);
ret = pageprog(mtd);
if (!ret)
mtd->ecc_stats.badblocks++;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 805bcf3..dcf4152 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1311,7 +1311,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
/* Write the first page of the current stride. */
dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
- chip->ecc.write_page_raw(mtd, chip, buffer, false);
+ chip->ecc.write_page_raw(mtd, chip, buffer, 0);
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
/* Wait for the write to finish. */
--
1.7.5.4.2.g519b1
More information about the linux-mtd
mailing list