[PATCH 05/39] ARM: OMAP2+: nand: create platform data structure
Afzal Mohammed
afzal at ti.com
Tue May 1 08:06:37 EDT 2012
New API for updating nand platform data. This has
been created by unifying the two existing ones and
taking out gpmc hardware handling.
>From now on, platforms can call omap_nand_init to
initialize platform nand structures, it's fields.
Or can statically create the same.
Acquiring gpmc CS for has been removed. Acquiring CS
is done in GPMC driver. To leverage this feature,
pass CS # as any value outside the allowed range of
0 - 7 (this is valid only for connected NAND),
eg. GPMC_CS_NUM (8)
Signed-off-by: Afzal Mohammed <afzal at ti.com>
---
arch/arm/mach-omap2/board-devkit8000.c | 6 ++-
arch/arm/mach-omap2/board-flash.c | 61 ++++++++++++++--------------
arch/arm/mach-omap2/board-flash.h | 13 ++++--
arch/arm/mach-omap2/board-ldp.c | 4 +-
arch/arm/mach-omap2/board-omap3beagle.c | 6 ++-
arch/arm/mach-omap2/board-omap3touchbook.c | 6 ++-
arch/arm/mach-omap2/board-overo.c | 5 ++-
arch/arm/mach-omap2/board-zoom.c | 5 ++-
arch/arm/mach-omap2/common-board-devices.c | 46 ---------------------
arch/arm/mach-omap2/common-board-devices.h | 1 -
10 files changed, 60 insertions(+), 93 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a2010f0..aa352d1 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -59,6 +59,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#define OMAP_DM9000_GPIO_IRQ 25
@@ -648,8 +649,9 @@ static void __init devkit8000_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
- ARRAY_SIZE(devkit8000_nand_partitions));
+ board_nand_init(devkit8000_nand_partitions,
+ ARRAY_SIZE(devkit8000_nand_partitions), GPMC_CS_NUM,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 0349fd2..091aaf6 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -108,45 +108,45 @@ __init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+ {
+ .sync_clk = 0,
- .sync_clk = 0,
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
+ .we_off = 30,
+ .oe_off = 48,
- .we_off = 30,
- .oe_off = 48,
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
+ },
};
-static struct omap_nand_platform_data board_nand_data = {
- .gpmc_t = &nand_timings,
+static struct omap_nand_platform_data omap_nand_data = {
+ .gpmc_t = nand_default_timings,
};
-void
-__init board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+struct omap_nand_platform_data *
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+ int nand_type, struct gpmc_timings *gpmc_t)
{
- board_nand_data.cs = cs;
- board_nand_data.parts = nand_parts;
- board_nand_data.nr_parts = nr_parts;
- board_nand_data.devsize = nand_type;
-
- board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
- board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
- gpmc_nand_init(&board_nand_data);
+ omap_nand_data.cs = cs;
+ omap_nand_data.parts = nand_parts;
+ omap_nand_data.nr_parts = nr_parts;
+ omap_nand_data.devsize = nand_type;
+ omap_nand_data.gpmc_t = gpmc_t;
+
+ return &omap_nand_data;
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -243,5 +243,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
pr_err("NAND: Unable to find configuration in GPMC\n");
else
board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs, nand_type);
+ partition_info[2].nr_parts, nandcs,
+ nand_type, nand_default_timings);
}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index d25503a..052964c 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -39,11 +39,16 @@ static inline void board_flash_init(struct flash_partitions part[],
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type);
+extern struct gpmc_timings nand_default_timings[];
+extern struct omap_nand_platform_data *
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+ int nand_type, struct gpmc_timings *gpmc_t);
#else
-static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+#define nand_default_timings NULL
+static inline struct omap_nand_platform_data *
+board_nand_init(struct mtd_partition *nand_parts,
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
{
+ return NULL;
}
#endif
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 1b60495..b76f28d 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -427,8 +427,8 @@ static void __init omap_ldp_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
- board_nand_init(ldp_nand_partitions,
- ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+ board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+ ZOOM_NAND_CS, 0, nand_default_timings);
omap_hsmmc_init(mmc);
ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7be8d65..671ac1c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -51,6 +51,7 @@
#include "mux.h"
#include "hsmmc.h"
#include "pm.h"
+#include "board-flash.h"
#include "common-board-devices.h"
/*
@@ -542,8 +543,9 @@ static void __init omap3_beagle_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions));
+ board_nand_init(omap3beagle_nand_partitions,
+ ARRAY_SIZE(omap3beagle_nand_partitions), GPMC_CS_NUM,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index ae2251f..b691728 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -52,6 +52,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#include <asm/setup.h>
@@ -370,8 +371,9 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
- ARRAY_SIZE(omap3touchbook_nand_partitions));
+ board_nand_init(omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions), GPMC_CS_NUM,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 33aa391..e08479a 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -57,6 +57,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#define OVERO_GPIO_BT_XGATE 15
@@ -517,8 +518,8 @@ static void __init overo_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_nand_flash_init(0, overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions));
+ board_nand_init(overo_nand_partitions,
+ ARRAY_SIZE(overo_nand_partitions), GPMC_CS_NUM, 0, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 5c20bcc..664e913 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -114,8 +114,9 @@ static void __init omap_zoom_init(void)
usbhs_init(&usbhs_bdata);
}
- board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
- ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+ board_nand_init(zoom_nand_partitions,
+ ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+ NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 1706ebc..0fd35a4 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -93,49 +93,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
{
}
#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- nand_data.cs = nandcs;
- nand_data.parts = parts;
- nand_data.nr_parts = nr_parts;
- nand_data.devsize = options;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a428..72bb41b 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -10,6 +10,5 @@ struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
--
1.7.10
More information about the linux-mtd
mailing list