[PATCH 1/3] ARM: imx6q: add clocks for gpmi-nand

Dong Aisheng aisheng.dong at freescale.com
Thu Jun 28 22:29:04 EDT 2012


On Thu, Jun 28, 2012 at 11:52:03PM -0400, Huang Shijie wrote:
> Add clocks for gpmi-nand.
> 
> Signed-off-by: Huang Shijie <shijie8 at gmail.com>
> Signed-off-by: Huang Shijie <b32955 at freescale.com>
> ---
>  arch/arm/mach-imx/clk-imx6q.c |    8 +++++++-
>  1 files changed, 7 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 12d9040..f293bcd 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -151,7 +151,7 @@ enum mx6q_clks {
>  	esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
>  	hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
>  	ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
> -	mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4,
> +	mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
>  	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
>  	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
>  	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
> @@ -357,6 +357,7 @@ int __init mx6q_clocks_init(void)
>  	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
>  	clk[openvg_axi]   = imx_clk_gate2("openvg_axi",    "axi",               base + 0x74, 30);
>  	clk[pcie_axi]     = imx_clk_gate2("pcie_axi",      "pcie_axi_sel",      base + 0x78, 0);
> +	clk[per1_bch]     = imx_clk_gate2("per1_bch",      "usdhc3",            base + 0x78, 12);
>  	clk[pwm1]         = imx_clk_gate2("pwm1",          "ipg_per",           base + 0x78, 16);
>  	clk[pwm2]         = imx_clk_gate2("pwm2",          "ipg_per",           base + 0x78, 18);
>  	clk[pwm3]         = imx_clk_gate2("pwm3",          "ipg_per",           base + 0x78, 20);
> @@ -394,6 +395,11 @@ int __init mx6q_clocks_init(void)
>  	clk_register_clkdev(clk[twd], NULL, "smp_twd");
>  	clk_register_clkdev(clk[usboh3], NULL, "usboh3");
>  	clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
> +	clk_register_clkdev(clk[per1_bch], "per1_bch", NULL);
...
> +	clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", NULL);
> +	clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", NULL);
> +	clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", NULL);
Are above three clocks gpmi private?
If yes, you'd better specify a dev_id for it.

> +	clk_register_clkdev(clk[gpmi_io], NULL, "112000.gpmi-nand");
We had several gpmi clocks here, so i guess it would be good if we have
the con_id set here too to distinguish what's this clock for.

>  	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
>  	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
>  	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
> -- 
> 1.7.4.4

Regards
Dong Aisheng




More information about the linux-mtd mailing list