[PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig

[Russell King - ARM Linux]

On Wed, Jun 27, 2012 at 05:51:12PM +0200, Roland Stigge wrote:
> From: Alexandre Pereira da Silva <aletes.xgr at gmail.com>
> 
> Since this driver depends on the amba pl08x dma driver, select it in Kconfig.
> 
> Signed-off-by: Alexandre Pereira da Silva <aletes.xgr at gmail.com>
> Signed-off-by: Roland Stigge <stigge at antcom.de>
> ---
>  drivers/mtd/nand/Kconfig |    1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index de69978..a9e8b73 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -417,6 +417,7 @@ config MTD_NAND_PXA3xx
>  config MTD_NAND_SLC_LPC32XX
>  	tristate "NXP LPC32xx SLC Controller"
>  	depends on ARCH_LPC32XX
> +	select AMBA_PL08X
>  	help
>  	  Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
>  	  chips) NAND controller. This is the default for the PHYTEC 3250

Surely not?  Drivers using DMA engine really should not depend on any
particular DMA engine implementation.