Patch MTD: increase time out value for buffer program

[Artem Bityutskiy]

On Tue, 2012-06-26 at 18:58 +0300, Artem Bityutskiy wrote:
> On Wed, 2012-06-13 at 04:29 +0000, Changming Chen (changmingche) wrote:
> > The time out value(1ms:typical HZ defined smaller than 1000) defined for function "do_write_buffer" in "cfi_cmdset_0002.c" is not enough. Because the enlargement of buffer size, much time will cost for buffer program. It's has risk that time out will be triggered before buffer program finished and make misjudge for buffer program. we suggest that 4ms is more appropriate compare to 1ms. This change has no impact of program performance.
> > 
> > diff --git a/a/drivers/mtd/chips/cfi_cmdset_0002.c b/b/drivers/mtd/chips/cfi_cmd
> > index 9d93c45..7da8fca 100755
> > --- a/a/drivers/mtd/chips/cfi_cmdset_0002.c
> > +++ b/b/drivers/mtd/chips/cfi_cmdset_0002.c
> > @@ -1312,7 +1312,7 @@ static int __xipram do_write_buffer(struct map_info *map, 
> >          struct cfi_private *cfi = map->fldrv_priv;
> >          unsigned long timeo = jiffies + HZ;
> >          /* see comments in do_write_oneword() regarding uWriteTimeo. */
> > -        unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
> > +        unsigned long uWriteTimeout = ( HZ / 1000 ) + 4;
> 
> No, sorry, this is not a fix, this is a band-aid. The whole HZ/1000
> thing is broken. You should not use HZ at all. For this driver it looks
> like you should use ' schedule_timeout()' with the right timout instead
> of 'schedule()' and get rid of all the HZ and jiffies stuff.

What I meant is something like this (not tested, not even compiled),
which should also be done in many other places in this file:

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 22d0493..8ce3b44 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -48,6 +48,9 @@
 #define SST49LF008A		0x005a
 #define AT49BV6416		0x00d6
 
+/* Write operation timeout, ms */
+#define WRITE_TIEMEOUT 2
+
 static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -1143,17 +1146,6 @@ static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len,
 static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, map_word datum)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
-	unsigned long timeo = jiffies + HZ;
-	/*
-	 * We use a 1ms + 1 jiffies generic timeout for writes (most devices
-	 * have a max write time of a few hundreds usec). However, we should
-	 * use the maximum timeout value given by the chip at probe time
-	 * instead.  Unfortunately, struct flchip does have a field for
-	 * maximum timeout, only for typical which can be far too short
-	 * depending of the conditions.	 The ' + 1' is to avoid having a
-	 * timeout of 0 jiffies if HZ is smaller than 1000.
-	 */
-	unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
 	int ret = 0;
 	map_word oldd;
 	int retry_cnt = 0;
@@ -1197,8 +1189,6 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 				adr, map_bankwidth(map),
 				chip->word_write_time);
 
-	/* See comment above for timeout value. */
-	timeo = jiffies + uWriteTimeout;
 	for (;;) {
 		if (chip->state != FL_WRITING) {
 			/* Someone's suspended the write. Sleep */
@@ -1207,20 +1197,18 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
 			mutex_unlock(&chip->mutex);
-			schedule();
+			ret = schedule_timeout(msecs_to_jiffies(WRITE_TIEMEOUT));
 			remove_wait_queue(&chip->wq, &wait);
-			timeo = jiffies + (HZ / 2); /* FIXME */
 			mutex_lock(&chip->mutex);
+			if (!ret) {
+				xip_enable(map, chip, adr);
+				printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
+				xip_disable(map, chip, adr);
+				break;
+			}
 			continue;
 		}
 
-		if (time_after(jiffies, timeo) && !chip_ready(map, adr)){
-			xip_enable(map, chip, adr);
-			printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
-			xip_disable(map, chip, adr);
-			break;
-		}
-
 		if (chip_ready(map, adr))
 			break;
 
-- 
Best Regards,
Artem Bityutskiy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20120627/819956b1/attachment.sig>