[PATCH 1/4] mtd nand mxc_nand: Use managed resources
Sascha Hauer
s.hauer at pengutronix.de
Wed Jun 6 06:33:13 EDT 2012
To make the error path simpler and to make subsequent patches
easier.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
drivers/mtd/nand/mxc_nand.c | 70 ++++++++++++++-----------------------------
1 file changed, 23 insertions(+), 47 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index c58e6a9..a1136f3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1323,8 +1323,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
int err = 0;
/* Allocate memory for MTD device structure and private data */
- host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
- NAND_MAX_OOBSIZE, GFP_KERNEL);
+ host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host) +
+ NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL);
if (!host)
return -ENOMEM;
@@ -1351,26 +1351,17 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->clk = clk_get(&pdev->dev, "nfc");
- if (IS_ERR(host->clk)) {
- err = PTR_ERR(host->clk);
- goto eclk;
- }
-
- clk_prepare_enable(host->clk);
- host->clk_act = 1;
+ host->clk = devm_clk_get(&pdev->dev, "nfc");
+ if (IS_ERR(host->clk))
+ return PTR_ERR(host->clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- err = -ENODEV;
- goto eres;
- }
+ if (!res)
+ return -ENODEV;
- host->base = ioremap(res->start, resource_size(res));
- if (!host->base) {
- err = -ENOMEM;
- goto eres;
- }
+ host->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!host->base)
+ return -ENOMEM;
host->main_area0 = host->base;
@@ -1378,7 +1369,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
if (err > 0)
err = mxcnd_probe_pdata(host);
if (err < 0)
- goto eirq;
+ return err;
if (host->devtype_data->regs_offset)
host->regs = host->base + host->devtype_data->regs_offset;
@@ -1395,15 +1386,11 @@ static int __init mxcnd_probe(struct platform_device *pdev)
if (host->devtype_data->needs_ip) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res) {
- err = -ENODEV;
- goto eirq;
- }
- host->regs_ip = ioremap(res->start, resource_size(res));
- if (!host->regs_ip) {
- err = -ENOMEM;
- goto eirq;
- }
+ if (!res)
+ return -ENODEV;
+ host->regs_ip = devm_request_and_ioremap(&pdev->dev, res);
+ if (!host->regs_ip)
+ return -ENOMEM;
}
if (host->pdata.hw_ecc) {
@@ -1437,9 +1424,13 @@ static int __init mxcnd_probe(struct platform_device *pdev)
*/
host->devtype_data->irq_control(host, 0);
- err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
+ err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
+ IRQF_DISABLED, DRIVER_NAME, host);
if (err)
- goto eirq;
+ return err;
+
+ clk_prepare_enable(host->clk);
+ host->clk_act = 1;
/*
* Now that we "own" the interrupt make sure the interrupt mask bit is
@@ -1491,15 +1482,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
return 0;
escan:
- free_irq(host->irq, host);
-eirq:
- if (host->regs_ip)
- iounmap(host->regs_ip);
- iounmap(host->base);
-eres:
- clk_put(host->clk);
-eclk:
- kfree(host);
+ clk_disable_unprepare(host->clk);
return err;
}
@@ -1508,16 +1491,9 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
{
struct mxc_nand_host *host = platform_get_drvdata(pdev);
- clk_put(host->clk);
-
platform_set_drvdata(pdev, NULL);
nand_release(&host->mtd);
- free_irq(host->irq, host);
- if (host->regs_ip)
- iounmap(host->regs_ip);
- iounmap(host->base);
- kfree(host);
return 0;
}
--
1.7.10
More information about the linux-mtd
mailing list