[PATCH v2 2/3] mtd: nand: Let MTD_NAND_GPMI_NAND depend on MXS_DMA

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

MTD_NAND_GPMI_NAND driver depends on MXS_DMA to be selected, otherwise the following error happens
for imx_v6_v7_defconfig:

drivers/built-in.o: In function `gpmi_dma_filter':
clk-fixed-factor.c:(.text+0xb124c): undefined reference to `mxs_dma_is_apbh'
make: *** [vmlinux] Error 1

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Use 'depends' rather than 'select'
 drivers/mtd/nand/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a5d8a1b..da52c7d 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -463,6 +463,7 @@ config MTD_NAND_NANDSIM
 config MTD_NAND_GPMI_NAND
         bool "GPMI NAND Flash Controller driver"
         depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
+	depends on MXS_DMA
         help
 	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
 	 The GPMI controller is very powerful, with the help of BCH
-- 
1.7.1