[PATCH 3/3] UBI: kill CONFIG_MTD_UBI_BEB_RESERVE

Artem Bityutskiy dedekind1 at gmail.com
Wed Jul 18 07:38:45 EDT 2012


From: Shmulik Ladkani <shmulik.ladkani at gmail.com>

CONFIG_MTD_UBI_BEB_RESERVE and MIN_RESEVED_PEBS are no longer used,
since the amount of reserved eraseblocks for bad PEB handling is now
derived from 'ubi->bad_peb_limit' (ubi's maximum expected bad
eraseblocks).

Signed-off-by: Shmulik Ladkani <shmulik.ladkani at gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy at linux.intel.com>
---
 drivers/mtd/ubi/Kconfig |   16 ----------------
 drivers/mtd/ubi/ubi.h   |    3 ---
 2 files changed, 0 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index d747b0f..219ea2e 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -27,22 +27,6 @@ config MTD_UBI_WL_THRESHOLD
 	  life-cycle less than 10000, the threshold should be lessened (e.g.,
 	  to 128 or 256, although it does not have to be power of 2).
 
-config MTD_UBI_BEB_RESERVE
-	int "Percentage of reserved eraseblocks for bad eraseblocks handling"
-	default 2
-	range 0 25
-	help
-	  If the MTD device admits of bad eraseblocks (e.g. NAND flash), UBI
-	  reserves some amount of physical eraseblocks to handle new bad
-	  eraseblocks. When a physical eraseblock becomes bad, UBI uses these
-	  reserved physical eraseblocks to relocate the bad one. This
-	  configuration option specifies how many physical eraseblocks will be
-	  reserved for bad eraseblock handling (percents of total number of
-	  good physical eraseblocks on this MTD partition). If the underlying
-	  flash does not admit of bad eraseblocks (e.g. NOR flash), this value
-	  is ignored and nothing is reserved. Leave the default value if
-	  unsure.
-
 config MTD_UBI_BEB_LIMIT
 	int "Percentage of maximum expected bad eraseblocks"
 	default 2
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index aeb459e..c94612e 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -59,9 +59,6 @@
 #define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \
 				 __func__, ##__VA_ARGS__)
 
-/* Lowest number PEBs reserved for bad PEB handling */
-#define MIN_RESEVED_PEBS 2
-
 /* Background thread name pattern */
 #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd"
 
-- 
1.7.7.6




More information about the linux-mtd mailing list