[PATCH 2/2] mtd: gpmi: update the bitflip_threshold
Huang Shijie
b32955 at freescale.com
Tue Jul 3 04:24:33 EDT 2012
The origin code misses to update the bitflip_threshold when
we have already get the right ecc_strength.
The patch fixes it.
Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index a1bf31f..ed9571b 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1501,6 +1501,7 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
/* Adjust the ECC strength according to the chip. */
this->nand.ecc.strength = this->bch_geometry.ecc_strength;
this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
+ this->mtd.bitflip_threshold = this->bch_geometry.ecc_strength;
/* NAND boot init, depends on the gpmi_set_geometry(). */
return nand_boot_init(this);
--
1.7.0.4
More information about the linux-mtd
mailing list