[PATCH v2 2/3] arm:davinci: Move emif driver to drivers/mfd from mach-davinci folder
Manjunathappa, Prakash
prakash.pm at ti.com
Wed Jan 25 05:25:55 EST 2012
Move aemif kernel module from arch/arm/amch-davinci/ to multi functional
devices frame work.
Signed-off-by: Manjunathappa, Prakash <prakash.pm at ti.com>
---
Since v1:
Patch is generated using -M option.
arch/arm/Kconfig | 1 +
arch/arm/mach-davinci/Makefile | 4 +-
arch/arm/mach-davinci/aemif.c | 133 ---------------------
drivers/mfd/Makefile | 1 +
drivers/mfd/davinci_aemif.c | 238 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/davinci_aemif.h | 14 ++
6 files changed, 256 insertions(+), 135 deletions(-)
delete mode 100644 arch/arm/mach-davinci/aemif.c
create mode 100644 drivers/mfd/davinci_aemif.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 24626b0..5b717cf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -936,6 +936,7 @@ config ARCH_DAVINCI
select GENERIC_ALLOCATOR
select GENERIC_IRQ_CHIP
select ARCH_HAS_HOLES_MEMORYMODEL
+ select MFD_CORE
help
Support for TI's DaVinci platform.
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2db78bd..e25a459 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,8 +4,8 @@
#
# Common objects
-obj-y := time.o clock.o serial.o psc.o \
- dma.o usb.o common.o sram.o aemif.o
+obj-y := time.o clock.o serial.o io.o psc.o \
+ dma.o usb.o common.o sram.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
deleted file mode 100644
index b67c115..0000000
--- a/arch/arm/mach-davinci/aemif.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * AEMIF support for DaVinci SoCs
- *
- * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/time.h>
-
-#include <linux/mfd/davinci_aemif.h>
-
-/* Timing value configuration */
-
-#define TA(x) ((x) << 2)
-#define RHOLD(x) ((x) << 4)
-#define RSTROBE(x) ((x) << 7)
-#define RSETUP(x) ((x) << 13)
-#define WHOLD(x) ((x) << 17)
-#define WSTROBE(x) ((x) << 20)
-#define WSETUP(x) ((x) << 26)
-
-#define TA_MAX 0x3
-#define RHOLD_MAX 0x7
-#define RSTROBE_MAX 0x3f
-#define RSETUP_MAX 0xf
-#define WHOLD_MAX 0x7
-#define WSTROBE_MAX 0x3f
-#define WSETUP_MAX 0xf
-
-#define TIMING_MASK (TA(TA_MAX) | \
- RHOLD(RHOLD_MAX) | \
- RSTROBE(RSTROBE_MAX) | \
- RSETUP(RSETUP_MAX) | \
- WHOLD(WHOLD_MAX) | \
- WSTROBE(WSTROBE_MAX) | \
- WSETUP(WSETUP_MAX))
-
-/*
- * aemif_calc_rate - calculate timing data.
- * @wanted: The cycle time needed in nanoseconds.
- * @clk: The input clock rate in kHz.
- * @max: The maximum divider value that can be programmed.
- *
- * On success, returns the calculated timing value minus 1 for easy
- * programming into AEMIF timing registers, else negative errno.
- */
-static int aemif_calc_rate(int wanted, unsigned long clk, int max)
-{
- int result;
-
- result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
-
- pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted);
-
- /* It is generally OK to have a more relaxed timing than requested... */
- if (result < 0)
- result = 0;
-
- /* ... But configuring tighter timings is not an option. */
- else if (result > max)
- result = -EINVAL;
-
- return result;
-}
-
-/**
- * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface
- * @t: timing values to be progammed
- * @base: The virtual base address of the AEMIF interface
- * @cs: chip-select to program the timing values for
- *
- * This function programs the given timing values (in real clock) into the
- * AEMIF registers taking the AEMIF clock into account.
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
- void __iomem *base, unsigned cs)
-{
- unsigned set, val;
- int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
- unsigned offset = A1CR_OFFSET + cs * 4;
- struct clk *aemif_clk;
- unsigned long clkrate;
-
- if (!t)
- return 0; /* Nothing to do */
-
- aemif_clk = clk_get(NULL, "aemif");
- if (IS_ERR(aemif_clk))
- return PTR_ERR(aemif_clk);
-
- clkrate = clk_get_rate(aemif_clk);
-
- clkrate /= 1000; /* turn clock into kHz for ease of use */
-
- ta = aemif_calc_rate(t->ta, clkrate, TA_MAX);
- rhold = aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX);
- rstrobe = aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX);
- rsetup = aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX);
- whold = aemif_calc_rate(t->whold, clkrate, WHOLD_MAX);
- wstrobe = aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX);
- wsetup = aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX);
-
- if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
- whold < 0 || wstrobe < 0 || wsetup < 0) {
- pr_err("%s: cannot get suitable timings\n", __func__);
- return -EINVAL;
- }
-
- set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
- WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
-
- val = __raw_readl(base + offset);
- val &= ~TIMING_MASK;
- val |= set;
- __raw_writel(val, base + offset);
-
- return 0;
-}
-EXPORT_SYMBOL(davinci_aemif_setup_timing);
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b953bab..54fc267 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
+obj-${CONFIG_ARCH_DAVINCI} += davinci_aemif.o
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
diff --git a/drivers/mfd/davinci_aemif.c b/drivers/mfd/davinci_aemif.c
new file mode 100644
index 0000000..ab3292c
--- /dev/null
+++ b/drivers/mfd/davinci_aemif.c
@@ -0,0 +1,238 @@
+/*
+ * AEMIF support for DaVinci SoCs
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/mfd/davinci_aemif.h>
+#include <linux/mtd/physmap.h>
+#include <mach/nand.h>
+
+static struct mfd_cell davinci_emifs[] = {
+ {
+ .name = "davinci_nand",
+ },
+ {
+ .name = "physmap-flash",
+ },
+};
+
+/* Timing value configuration */
+
+#define TA(x) ((x) << 2)
+#define RHOLD(x) ((x) << 4)
+#define RSTROBE(x) ((x) << 7)
+#define RSETUP(x) ((x) << 13)
+#define WHOLD(x) ((x) << 17)
+#define WSTROBE(x) ((x) << 20)
+#define WSETUP(x) ((x) << 26)
+
+#define TA_MAX 0x3
+#define RHOLD_MAX 0x7
+#define RSTROBE_MAX 0x3f
+#define RSETUP_MAX 0xf
+#define WHOLD_MAX 0x7
+#define WSTROBE_MAX 0x3f
+#define WSETUP_MAX 0xf
+
+#define TIMING_MASK (TA(TA_MAX) | \
+ RHOLD(RHOLD_MAX) | \
+ RSTROBE(RSTROBE_MAX) | \
+ RSETUP(RSETUP_MAX) | \
+ WHOLD(WHOLD_MAX) | \
+ WSTROBE(WSTROBE_MAX) | \
+ WSETUP(WSETUP_MAX))
+
+/*
+ * aemif_calc_rate - calculate timing data.
+ * @wanted: The cycle time needed in nanoseconds.
+ * @clk: The input clock rate in kHz.
+ * @max: The maximum divider value that can be programmed.
+ *
+ * On success, returns the calculated timing value minus 1 for easy
+ * programming into AEMIF timing registers, else negative errno.
+ */
+static int aemif_calc_rate(int wanted, unsigned long clk, int max)
+{
+ int result;
+
+ result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
+
+ pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted);
+
+ /* It is generally OK to have a more relaxed timing than requested... */
+ if (result < 0)
+ result = 0;
+
+ /* ... But configuring tighter timings is not an option. */
+ else if (result > max)
+ result = -EINVAL;
+
+ return result;
+}
+
+/**
+ * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface
+ * @t: timing values to be progammed
+ * @base: The virtual base address of the AEMIF interface
+ * @cs: chip-select to program the timing values for
+ *
+ * This function programs the given timing values (in real clock) into the
+ * AEMIF registers taking the AEMIF clock into account.
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+ void __iomem *base, unsigned cs)
+{
+ unsigned set, val;
+ int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
+ unsigned offset = A1CR_OFFSET + cs * 4;
+ struct clk *aemif_clk;
+ unsigned long clkrate;
+
+ if (!t)
+ return 0; /* Nothing to do */
+
+ aemif_clk = clk_get(NULL, "aemif");
+ if (IS_ERR(aemif_clk))
+ return PTR_ERR(aemif_clk);
+
+ clkrate = clk_get_rate(aemif_clk);
+
+ clkrate /= 1000; /* turn clock into kHz for ease of use */
+
+ ta = aemif_calc_rate(t->ta, clkrate, TA_MAX);
+ rhold = aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX);
+ rstrobe = aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX);
+ rsetup = aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX);
+ whold = aemif_calc_rate(t->whold, clkrate, WHOLD_MAX);
+ wstrobe = aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX);
+ wsetup = aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX);
+
+ if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
+ whold < 0 || wstrobe < 0 || wsetup < 0) {
+ pr_err("%s: cannot get suitable timings\n", __func__);
+ return -EINVAL;
+ }
+
+ set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
+ WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
+
+ val = __raw_readl(base + offset);
+ val &= ~TIMING_MASK;
+ val |= set;
+ __raw_writel(val, base + offset);
+
+ return 0;
+}
+EXPORT_SYMBOL(davinci_aemif_setup_timing);
+
+static int __init davinci_aemif_probe(struct platform_device *pdev)
+{
+ struct davinci_aemif_devices *davinci_aemif_devices =
+ pdev->dev.platform_data;
+ struct platform_device *devices;
+ struct mfd_cell *cells;
+ int i, ret;
+
+ devices = davinci_aemif_devices->devices;
+ cells = davinci_emifs;
+
+ /* DaVinci NAND device client */
+ for (i = 0; i < davinci_aemif_devices->num_devices; i++) {
+ if (!strcmp(devices[i].name,
+ cells[DAVINCI_NAND_DEVICE_CELL].name))
+ break;
+
+ }
+ if (i > davinci_aemif_devices->num_devices) {
+ dev_err(&pdev->dev, "No NAND device found by DaVinci EMIF"
+ "MFD\n");
+ cells[DAVINCI_NAND_DEVICE_CELL].name = NULL;
+ } else {
+ cells[DAVINCI_NAND_DEVICE_CELL].platform_data =
+ devices[i].dev.platform_data;
+ cells[DAVINCI_NAND_DEVICE_CELL].pdata_size =
+ sizeof(struct davinci_nand_pdata);
+ cells[DAVINCI_NAND_DEVICE_CELL].id = devices[i].id;
+ cells[DAVINCI_NAND_DEVICE_CELL].resources =
+ devices[i].resource;
+ cells[DAVINCI_NAND_DEVICE_CELL].num_resources =
+ devices[i].num_resources;
+ }
+
+ /* DaVinci NOR device client */
+ for (i = 0; i < davinci_aemif_devices->num_devices; i++) {
+ if (!strcmp(devices[i].name,
+ cells[DAVINCI_NOR_FLASH_CELL].name))
+ break;
+ }
+
+ if (i > davinci_aemif_devices->num_devices) {
+ dev_err(&pdev->dev, "No NOR device found by DaVinci EMIF"
+ "MFD\n");
+ cells[DAVINCI_NOR_FLASH_CELL].name = NULL;
+ } else {
+ cells[DAVINCI_NOR_FLASH_CELL].platform_data =
+ devices[i].dev.platform_data;
+ cells[DAVINCI_NOR_FLASH_CELL].pdata_size =
+ sizeof(struct physmap_flash_data);
+ cells[DAVINCI_NOR_FLASH_CELL].id = devices[i].id;
+ cells[DAVINCI_NOR_FLASH_CELL].resources = devices[i].resource;
+ cells[DAVINCI_NOR_FLASH_CELL].num_resources =
+ devices[i].num_resources;
+ }
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id, cells,
+ davinci_aemif_devices->num_devices, NULL, 0);
+ if (ret != 0)
+ dev_err(&pdev->dev, "fail to register client devices\n");
+
+ return 0;
+}
+
+static int __devexit davinci_aemif_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+ return 0;
+}
+
+static struct platform_driver davinci_aemif_driver = {
+ .driver = {
+ .name = "davinci_aemif",
+ .owner = THIS_MODULE,
+ },
+ .remove = __devexit_p(davinci_aemif_remove),
+};
+
+static int __init davinci_aemif_init(void)
+{
+ return platform_driver_probe(&davinci_aemif_driver,
+ davinci_aemif_probe);
+}
+module_init(davinci_aemif_init);
+
+static void __exit davinci_aemif_exit(void)
+{
+ platform_driver_unregister(&davinci_aemif_driver);
+}
+module_exit(davinci_aemif_exit);
+
+MODULE_AUTHOR("Prakash Manjunathappa");
+MODULE_DESCRIPTION("Texas Instruments AEMIF Interface");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/davinci_aemif.h b/include/linux/mfd/davinci_aemif.h
index 05b2934..18650c3 100644
--- a/include/linux/mfd/davinci_aemif.h
+++ b/include/linux/mfd/davinci_aemif.h
@@ -10,6 +10,10 @@
#ifndef _MACH_DAVINCI_AEMIF_H
#define _MACH_DAVINCI_AEMIF_H
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+
#define NRCSR_OFFSET 0x00
#define AWCCR_OFFSET 0x04
#define A1CR_OFFSET 0x10
@@ -18,6 +22,16 @@
#define ACR_EW_MASK BIT(30)
#define ACR_SS_MASK BIT(31)
+enum davinci_emif_cells {
+ DAVINCI_NAND_DEVICE_CELL,
+ DAVINCI_NOR_FLASH_CELL,
+};
+
+struct davinci_aemif_devices {
+ struct platform_device *devices;
+ unsigned int num_devices;
+};
+
/* All timings in nanoseconds */
struct davinci_aemif_timing {
u8 wsetup;
--
1.7.1
More information about the linux-mtd
mailing list