[PATCH 5/6 V3] atmel/nand: add DT support

[Nicolas Ferre]

On 02/21/2012 10:46 AM, Jean-Christophe PLAGNIOL-VILLARD :
> Use a local copy of board informatin and fill with DT data.
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> Acked-by: Grant Likely <grant.likely at secretlab.ca>
> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: linux-mtd at lists.infradead.org
> ---
> v3:
> 
> 	protect against !CONFIG_OF
> 
> Best Regards,
> J.
>  .../devicetree/bindings/mtd/atmel-nand.txt         |   41 +++++++
>  arch/arm/boot/dts/at91sam9g20.dtsi                 |   17 +++
>  arch/arm/boot/dts/at91sam9g45.dtsi                 |   17 +++
>  arch/arm/boot/dts/at91sam9m10g45ek.dts             |   26 +++++-
>  arch/arm/boot/dts/usb_a9g20.dts                    |   46 ++++++++-
>  arch/arm/mach-at91/at91sam9x5.c                    |    5 -

As we will put this series on top of 9x5, we may also add the entries in
at91sam9x5.dtsi / at91sam9x5cm.dtsi ...

>  arch/arm/mach-at91/board-dt.c                      |   52 ---------
>  drivers/mtd/nand/atmel_nand.c                      |  113 ++++++++++++++++----
>  8 files changed, 238 insertions(+), 79 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/atmel-nand.txt

Otherwise,

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

Bye,
-- 
Nicolas Ferre