[PATCH v5] mtd: nand: write BBM to OOB even with flash-based BBT

[Bityutskiy, Artem]

On Mon, 2012-02-06 at 13:44 -0800, Brian Norris wrote:
> Currently, the flash-based BBT implementation writes bad block data only
> to its flash-based table and not to the OOB marker area. Then, as new bad
> blocks are marked over time, the OOB markers become incomplete and the
> flash-based table becomes the only source of current bad block
> information. This becomes an obvious problem when, for example:

Pushed to l2-mtd.git, thanks!

-- 
Best Regards,
Artem Bityutskiy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20120208/8bb2201a/attachment-0001.sig>
-------------- next part --------------
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki 
Business Identity Code: 0357606 - 4 
Domiciled in Helsinki 

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.