UBI IO errors with GPMI NAND

[Vikram Narayanan]

Hello Huang,

On 12/18/2012 7:20 AM, Huang Shijie wrote:
> 于 2012年12月15日 11:42, Vikram Narayanan 写道:
>> I'm using a i.Mx6 Solo based custom board with the below NAND chip.
> The gpmi-nand can not run in the imx6 solo board. Please check the
> PINMUX for the gpmi. It is not ready.

I adapted the PINMUX for Solo variant. Is there any other thing other 
than PINUMX which restricts the usage on i.Mx6 solo?

Regards,
Vikram