[PATCH] mtd: gpmi: Always report ECC stats and return max_bitflips
zsadecki at itwatchdogs.com
Thu Dec 13 21:39:56 EST 2012
On 12/13/2012 05:27 AM, Artem Bityutskiy wrote:
> On Mon, 2012-12-10 at 09:18 -0600, Zach Sadecki wrote:
>> Always report corrected and failed ECC stats back up to the MTD layer. Also
>> return max_bitflips from read_page() as is expected from NAND drivers now.
>> Signed-off-by: Zach Sadecki <zsadecki at itwatchdogs.com>
>> Acked-by: Huang Shijie <b32955 at freescale.com>
> Dunno, may be your patch is corrupted or something. Try to save it and
> apply. This is what I get:
> $ git apply --check ~/tmp/zach.mbox
> error: patch failed: drivers/mtd/nand/gpmi-nand/gpmi-nand.c:921
> error: drivers/mtd/nand/gpmi-nand/gpmi-nand.c: patch does not apply
> $ git log -1 --oneline
> 70df8b3 mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
> I've attached the zach.mbox file for you.
OK. I rebased the patch on the latest l2-mtd and I tested it with git
apply, so this one should work...
Sent as a separate reply with only the patch in it.
More information about the linux-mtd