[PATCH v2 6/6] mtd: mtd_nandecctest: add double bit error detection tests
Akinobu Mita
akinobu.mita at gmail.com
Sun Aug 26 08:06:48 EDT 2012
This adds the double bit error detection test cases listed below:
* Prepare data block with double bit error and ECC data without
corruption, and verify that the uncorrectable error is detected by
__nand_correct_data().
* Prepare data block with single bit error and ECC data with single bit
error, and verify that the uncorrectable error is detected.
* Prepare data block without corruption and ECC data with double bit
error, and verify that the uncorrectable error is detected.
Signed-off-by: Akinobu Mita <akinobu.mita at gmail.com>
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: linux-mtd at lists.infradead.org
Cc: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
---
drivers/mtd/tests/mtd_nandecctest.c | 80 +++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
index d7d7983..7d8a7b8 100644
--- a/drivers/mtd/tests/mtd_nandecctest.c
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -34,6 +34,22 @@ static void single_bit_error_data(void *error_data, void *correct_data,
__change_bit_le(offset, error_data);
}
+static void double_bit_error_data(void *error_data, void *correct_data,
+ size_t size)
+{
+ unsigned int offset[2];
+
+ offset[0] = random32() % (size * BITS_PER_BYTE);
+ do {
+ offset[1] = random32() % (size * BITS_PER_BYTE);
+ } while (offset[0] == offset[1]);
+
+ memcpy(error_data, correct_data, size);
+
+ __change_bit_le(offset[0], error_data);
+ __change_bit_le(offset[1], error_data);
+}
+
static unsigned int random_ecc_bit(size_t size)
{
unsigned int offset = random32() % (3 * BITS_PER_BYTE);
@@ -59,6 +75,21 @@ static void single_bit_error_ecc(void *error_ecc, void *correct_ecc,
__change_bit_le(offset, error_ecc);
}
+static void double_bit_error_ecc(void *error_ecc, void *correct_ecc,
+ size_t size)
+{
+ unsigned int offset[2];
+
+ offset[0] = random_ecc_bit(size);
+ do {
+ offset[1] = random_ecc_bit(size);
+ } while (offset[0] == offset[1]);
+
+ memcpy(error_ecc, correct_ecc, 3);
+ __change_bit_le(offset[0], error_ecc);
+ __change_bit_le(offset[1], error_ecc);
+}
+
static void no_bit_error(void *error_data, void *error_ecc,
void *correct_data, void *correct_ecc, const size_t size)
{
@@ -108,6 +139,40 @@ static int single_bit_error_correct(void *error_data, void *error_ecc,
return -EINVAL;
}
+static void double_bit_error_in_data(void *error_data, void *error_ecc,
+ void *correct_data, void *correct_ecc, const size_t size)
+{
+ double_bit_error_data(error_data, correct_data, size);
+ memcpy(error_ecc, correct_ecc, 3);
+}
+
+static void single_bit_error_in_data_and_ecc(void *error_data, void *error_ecc,
+ void *correct_data, void *correct_ecc, const size_t size)
+{
+ single_bit_error_data(error_data, correct_data, size);
+ single_bit_error_ecc(error_ecc, correct_ecc, size);
+}
+
+static void double_bit_error_in_ecc(void *error_data, void *error_ecc,
+ void *correct_data, void *correct_ecc, const size_t size)
+{
+ memcpy(error_data, correct_data, size);
+ double_bit_error_ecc(error_ecc, correct_ecc, size);
+}
+
+static int double_bit_error_detect(void *error_data, void *error_ecc,
+ void *correct_data, const size_t size)
+
+{
+ unsigned char calc_ecc[3];
+ int ret;
+
+ __nand_calculate_ecc(error_data, size, calc_ecc);
+ ret = __nand_correct_data(error_data, calc_ecc, error_ecc, size);
+
+ return (ret == -1) ? 0 : -EINVAL;
+}
+
static const struct nand_ecc_test nand_ecc_test[] = {
{
.name = "no-bit-error",
@@ -124,6 +189,21 @@ static const struct nand_ecc_test nand_ecc_test[] = {
.prepare = single_bit_error_in_ecc,
.verify = single_bit_error_correct,
},
+ {
+ .name = "double-bit-error-in-data-detect",
+ .prepare = double_bit_error_in_data,
+ .verify = double_bit_error_detect,
+ },
+ {
+ .name = "single-bit-error-in-data-and-ecc-detect",
+ .prepare = single_bit_error_in_data_and_ecc,
+ .verify = double_bit_error_detect,
+ },
+ {
+ .name = "double-bit-error-in-ecc-detect",
+ .prepare = double_bit_error_in_ecc,
+ .verify = double_bit_error_detect,
+ },
};
static void dump_data_ecc(void *error_data, void *error_ecc, void *correct_data,
--
1.7.11.4
More information about the linux-mtd
mailing list