[PATCH 1/3] mtd: cmdlinepart: make the partitions rule more strict

[Huang Shijie]

There are typically two types to set the mtd partitions:

<1> set with the `size`, such as
    gpmi-nand:100m(boot),100m(kernel),1g(rootfs)

<2> set with the `offset`, such as
    gpmi-nand:100m at 0(boot),100m at 100m(kernel),1g at 200m(rootfs)
    gpmi-nand:1g at 200m(rootfs),100m at 0(boot),100m at 100m(kernel)

If we mix these two types, such as:
     gpmi-nand:100m at 0(boot),100m(kernel),1g at 200m(rootfs)
     gpmi-nand:1g at 200m(rootfs),100m at 0(boot),100m(kernel)

It's hard to understand the cmdline. And also it is hard to sort the
partitions in this mixed type. So we explicitly forbid the mixed type.

Signed-off-by: Huang Shijie <shijie8 at gmail.com>
---
 drivers/mtd/cmdlinepart.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index fe7e3a5..0b7b2ad 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -35,6 +35,15 @@
  *
  * 1 NOR Flash with 2 partitions, 1 NAND with one
  * edb7312-nor:256k(ARMboot)ro,-(root);edb7312-nand:-(home)
+ *
+ * Note:
+ * If you choose to set the @offset for the <partdef>, please set all
+ * the partitions with the same syntax, such as:
+ *     gpmi-nand:100m at 0(boot),100m at 100m(kernel),1g at 200m(rootfs)
+ *
+ * Please do _NOT_ set the partitions like this:
+ *     gpmi-nand:100m at 0(boot),100m(kernel),1g at 200m(rootfs)
+ * The `kernel` partition does not set with the @offset, this is not permitted.
  */
 
 #include <linux/kernel.h>
-- 
1.7.4.4