[PATCH v2 0/7] UBI: add max_beb_per1024 parameter / ioctl
Richard Genoud
richard.genoud at gmail.com
Mon Aug 20 08:09:14 EDT 2012
Artem,
This patch serie introduce, step by step the kernel module parameter
max_beb_per1024, then the ioctl and finally drop the kernel config option
CONFIG_MTD_UBI_BEB_LIMIT.
It's based on top of linux-ubi/master (4ebb4b5)
The differences from previous version are:
* The upper bound of max_beb_per1024 is checked and set to 768
* The vid_hdr_offs parameter can now be an empty string in order to have a
kernel parameter like that: mtd.ubi=2,,25
* The max_beb_per1024 parameter can also be empty (just for consistency with
vid_hdr_offs)
* The comment in ubi-user.h has been adjusted with the new range 0-768 and
the term "default kernel value" is used in place of MTD_UBI_DEFAULT_BEB_LIMIT
or CONFIG_MTD_UBI_BEB_LIMIT
* As max_beb_per1024 can be safely null, the config range of MTD_UBI_BEB_LIMIT
has been updates to 0..768
* For the ioctl, max_beb_per1024 is now an __u16, so that we are not limited
to 255 anymore.
* The comment on the default value of max_beb_per1024 has been adjusted before
and after the ioctl patch.
I compiled and tested each patch, so every thing should go smoothly.
I tested also with a 0 value for CONFIG_MTD_UBI_BEB_LIMIT, it seemed to go
well.
Best Regards
Richard.
Richard Genoud (7):
UBI: prepare for max_beb_per1024 module parameter addition
UBI: change CONFIG_MTD_UBI_BEB_LIMIT range
UBI: accept empty string for vid_hdr_offs parameter
UBI: check max_beb_per1024 value in ubi_attach_mtd_dev
UBI: replace MTD_UBI_BEB_LIMIT with module parameter
UBI: add ioctl for max_beb_per1024
UBI: drop CONFIG_MTD_UBI_BEB_LIMIT
arch/arm/configs/sam9_l9260_defconfig | 1 -
drivers/mtd/ubi/Kconfig | 26 ------------
drivers/mtd/ubi/build.c | 69 ++++++++++++++++++++++++---------
drivers/mtd/ubi/cdev.c | 3 +-
drivers/mtd/ubi/ubi.h | 6 ++-
include/mtd/ubi-user.h | 19 +++++++++-
6 files changed, 75 insertions(+), 49 deletions(-)
--
1.7.2.5
More information about the linux-mtd
mailing list