[PATCH 6/8] UBI: replace MTD_UBI_BEB_LIMIT with module parameter

Shmulik Ladkani shmulik.ladkani at gmail.com
Sun Aug 19 05:26:34 EDT 2012


Hi Richard,

On Fri, 17 Aug 2012 16:35:22 +0200 Richard Genoud <richard.genoud at gmail.com> wrote:
> +		      "MTD devices may be specified by their number, name, or path to the MTD character device node.\n"
> +		      "Optional \"vid_hdr_offs\" parameter specifies UBI VID header position to be used by UBI. (default value if 0 or not set)\n"
> +		      "Optional \"max_beb_per1024\" parameter specifies the maximum expected bad eraseblock per 1024 eraseblocks. (default value ("
> +		      __stringify(CONFIG_MTD_UBI_BEB_LIMIT) ") if 0 or not set)\n"

Looks like "mtd=/dev/mtd1,,25" is invalid, although we state "default
value if 0 or not set".

Also, lines are exceeding 80 chars, not sure this is more readable than
if they were broken.

Regards,
Shmulik



More information about the linux-mtd mailing list