[PATCH v2 2/3] mtd: nand: Let MTD_NAND_GPMI_NAND depend on MXS_DMA

[Dirk Behme]

On 03.08.2012 12:07, Sascha Hauer wrote:
> On Wed, Jul 25, 2012 at 08:18:19AM -0300, Fabio Estevam wrote:
>> From: Fabio Estevam<fabio.estevam at freescale.com>
>>
>> MTD_NAND_GPMI_NAND driver depends on MXS_DMA to be selected, otherwise the following error happens
>> for imx_v6_v7_defconfig:
>>
>> drivers/built-in.o: In function `gpmi_dma_filter':
>> clk-fixed-factor.c:(.text+0xb124c): undefined reference to `mxs_dma_is_apbh'
>> make: *** [vmlinux] Error 1
>>
>> Signed-off-by: Fabio Estevam<fabio.estevam at freescale.com>
>
> Acked-by: Sascha Hauer<s.hauer at pengutronix.de>
>
> As mentioned elsewhere in this thread: We should not select user visible
> options, so this patch is the only thing we can do atm (apart from
> 'fixing the tools' as David mentioned, but this is out of scope for an
> -rc kernel)

I asked Shawn about this and it seems that this patch is the way to go 
for the moment. So:

Acked-by: Dirk Behme <dirk.behme at gmail.com>

David: Artem: Building recent 3.6-rc1mainline with imx_v6_v7_defconfig 
is broken. We need this patch to get it working, again.

It would be nice if this patch could go as a fix into 3.6-rcX mainline 
asap. Could you help with this?

Many thanks and best regards

Dirk

> Additionally the imx_v6_v7_defconfig should be adjusted so that the gpmi
> nand driver actually gets built.
>
> Sascha
>
>> ---
>> Changes since v1:
>> - Use 'depends' rather than 'select'
>>   drivers/mtd/nand/Kconfig |    1 +
>>   1 files changed, 1 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
>> index a5d8a1b..da52c7d 100644
>> --- a/drivers/mtd/nand/Kconfig
>> +++ b/drivers/mtd/nand/Kconfig
>> @@ -463,6 +463,7 @@ config MTD_NAND_NANDSIM
>>   config MTD_NAND_GPMI_NAND
>>           bool "GPMI NAND Flash Controller driver"
>>           depends on MTD_NAND&&  (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
>> +	depends on MXS_DMA
>>           help
>>   	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
>>   	 The GPMI controller is very powerful, with the help of BCH
>> --
>> 1.7.1
>>
>>
>