[PATCH v4] mach-realview: expose PB1176 ROM using physmap and map_rom
Linus Walleij
linus.walleij at stericsson.com
Tue Sep 6 02:53:43 EDT 2011
From: Linus Walleij <linus.walleij at linaro.org>
This exposes the PB1176 ROM if you compile in the MTD physmap
mapping and also the map_rom chiptype.
Signed-off-by: Linus Walleij <linus.walleij at stericsson.com>
---
arch/arm/mach-realview/include/mach/board-pb1176.h | 1 +
arch/arm/mach-realview/realview_pb1176.c | 45 ++++++++++++++++----
2 files changed, 38 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 002ab5d..2a15fef 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -70,6 +70,7 @@
#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */
#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */
+#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */
#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ad5671a..dfbaeca 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -26,6 +26,8 @@
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -204,22 +206,48 @@ static struct amba_device *amba_devs[] __initdata = {
* RealView PB1176 platform devices
*/
static struct resource realview_pb1176_flash_resources[] = {
- [0] = {
+ {
.start = REALVIEW_PB1176_FLASH_BASE,
.end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
- [1] = {
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+ {
.start = REALVIEW_PB1176_SEC_FLASH_BASE,
.end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
-};
-#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
-#define PB1176_FLASH_BLOCKS 2
-#else
-#define PB1176_FLASH_BLOCKS 1
#endif
+};
+
+static struct physmap_flash_data pb1176_rom_pdata = {
+ .probe_type = "map_rom",
+ .width = 4,
+ .nr_parts = 0,
+};
+
+static struct resource pb1176_rom_resources[] = {
+ /*
+ * This exposes the PB1176 DevChip ROM as an MTD ROM mapping.
+ * The reference manual states that this is actually a pseudo-ROM
+ * programmed in NVRAM.
+ */
+ {
+ .start = REALVIEW_DC1176_ROM_BASE,
+ .end = REALVIEW_DC1176_ROM_BASE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device pb1176_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pb1176_rom_resources),
+ .resource = pb1176_rom_resources,
+ .dev = {
+ .platform_data = &pb1176_rom_pdata,
+ },
+};
static struct resource realview_pb1176_smsc911x_resources[] = {
[0] = {
@@ -338,7 +366,8 @@ static void __init realview_pb1176_init(void)
#endif
realview_flash_register(realview_pb1176_flash_resources,
- PB1176_FLASH_BLOCKS);
+ ARRAY_SIZE(realview_pb1176_flash_resources));
+ platform_device_register(&pb1176_rom_device);
realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
platform_device_register(&realview_i2c_device);
realview_usb_register(realview_pb1176_isp1761_resources);
--
1.7.3.2
More information about the linux-mtd
mailing list