[RFC] Change ECC algorithm from userspace

[Ricard Wanderlof]

On Fri, 28 Oct 2011, Jon Povey wrote:

> linux-mtd-bounces at lists.infradead.org wrote:
>> I want to be able to use 1-bit ECC for the first partition where I
>> save the loader binary and has to be accessed by the ROM boot but use
>> a 4-bit ECC for my rootfs partition.
>>
>> Does anyone have this same issue?
>
> DM355 and DM365 has similar issues as the RBL expects a different OOB/ECC
> layout to Linux.

Slightly off-topic, but in the 355/365 (etc) case it's possible to modify 
the Linux driver so it uses the RBL ECC layout. For us, it seemed the 
easiest thing to do, as having different ECC layouts in different parts
of the flash proved to be a pain. If you need different ECC algorithms in
different parts of the flash this wouldn't work of course.

/Ricard
-- 
Ricard Wolf Wanderlöf                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30