[PATCH 03/13] mtd/docg3: fix protection areas reading

Robert Jarzmik robert.jarzmik at free.fr
Fri Oct 28 13:51:22 EDT 2011


The protection areas boundaries were on 16bit registers, not
8bit. This is consistent with block numbers, which can
extend up to 4096 on bigger chips (and is 2048 on the
docg3).

Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
 drivers/mtd/devices/docg3.c |   16 +++++++++-------
 1 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 8942a75..5834e6e 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -852,13 +852,15 @@ static int dbg_protection_show(struct seq_file *s, void *p)
 {
 	struct docg3 *docg3 = (struct docg3 *)s->private;
 	int pos = 0;
-	int protect = doc_register_readb(docg3, DOC_PROTECTION);
-	int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
-	int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW);
-	int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH);
-	int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
-	int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW);
-	int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH);
+	int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
+
+	protect = doc_register_readb(docg3, DOC_PROTECTION);
+	dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+	dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW);
+	dps0_high = doc_register_readw(docg3, DOC_DPS0_ADDRHIGH);
+	dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+	dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW);
+	dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
 
 	pos += seq_printf(s, "Protection = 0x%02x (",
 			 protect);
-- 
1.7.5.4




More information about the linux-mtd mailing list