ubi vol_size and lots of bad blocks

[Atlant Schmidt]

Artem:

  Interesting! I'll ask our subject-matter expert;
  it would be great if this were resolved.

                          Atlant

-----Original Message-----
From: Artem Bityutskiy [mailto:dedekind1 at gmail.com]
Sent: Friday, October 14, 2011 08:58
To: Atlant Schmidt
Cc: 'Daniel Drake'; linux-mtd at lists.infradead.org
Subject: RE: ubi vol_size and lots of bad blocks

On Tue, 2011-10-11 at 07:35 -0400, Atlant Schmidt wrote:
>
>   Be careful here -- the last time I looked, blocks that go
>   bad *ARE NOT* actually permanently marked as bad; they may
>   no longer be used during the current boot, but the next time
>   you reboot, they're eligible for attempted-but-often-failing
>   use once again.

If this happened to you, this must be because of a bug in your MTD
driver. UBI dimply calls MTD mark_bad() function to mark blocks bad.

--
Best Regards,
Artem Bityutskiy



 Click https://www.mailcontrol.com/sr/fue6KqaG!5rTndxI!oX7Us7Qlo!t9IHt!Dknkv+q9bergxmG63nRctGYsfIhXbFK16EEqwzvaW+2eN6FcXjHgg==  to report this email as spam.

This e-mail and the information, including any attachments, it contains are intended to be a confidential communication only to the person or entity to whom it is addressed and may contain information that is privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the sender and destroy the original message.

Thank you.

Please consider the environment before printing this email.