NAND device: all blocks bad after restart, how to recover?

[Artem Bityutskiy]

On Fri, 2011-03-25 at 07:03 -0700, Lars Michael wrote:
> We investigated more and have found that the FlexBus on the Coldfire
> can cause problems for the NAND device. When the FlexBus devices are
> removed
> the NAND device comes back to life, and is again accessible. So now I 
> can get back to the UBI part of the project :-)

Good! :-)

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)