[PATCH 5/7] add GPMI support for imx28

[Artem Bityutskiy]

On Wed, 2011-03-16 at 09:55 +0800, Huang Shijie wrote:
> +       pio[0] =
> +               BF_GPMI_CTRL0_COMMAND_MODE(command_mode)        |
> +               BM_GPMI_CTRL0_WORD_LENGTH                       |
> +               BF_GPMI_CTRL0_CS(mil->current_chip)             |
> +               BF_GPMI_CTRL0_ADDRESS(address)                  |
> +               BF_GPMI_CTRL0_XFER_COUNT(mil->upper_len); 

Strange way to format the code ...

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)