[PATCH V3 2/6] dmaengine: add interrupt check for GPMI controller

Lothar Waßmann LW at KARO-electronics.de
Thu Mar 31 04:50:02 EDT 2011


Hi,

Huang Shijie writes:
> Hi:
> > Hi,
> >
> > Huang Shijie writes:
> >> The GPMI may have many DMA channels, such as the imx23 has
> >> four DMA channels. All these DMA channels share the same interrupt.
> >> Add the interrupt check for the GPMI, only the first DMA channel will
> >> register the irq.
> >>
> >> Signed-off-by: Huang Shijie<b32955 at freescale.com>
> >> ---
> >>   drivers/dma/mxs-dma.c |   36 ++++++++++++++++++++++++++++++++----
> >>   1 files changed, 32 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> >> index 88aad4f..db36bf1 100644
> >> --- a/drivers/dma/mxs-dma.c
> >> +++ b/drivers/dma/mxs-dma.c
> >> @@ -26,6 +26,8 @@
> >>   #include<asm/irq.h>
> >>   #include<mach/mxs.h>
> >>   #include<mach/dma.h>
> >> +#include<mach/mx23.h>
> >> +#include<mach/mx28.h>
> >>   #include<mach/common.h>
> >>
> >>   /*
> >> @@ -306,6 +308,30 @@ static irqreturn_t mxs_dma_int_handler(int irq, void *dev_id)
> >>   	return IRQ_HANDLED;
> >>   }
> >>
> >> +/* The GPMI has several DMA channels, only the first can register the irq. */
> >> +static bool irq_check(struct mxs_dma_chan *mxs_chan)
> >> +{
> >> +	int irq_num = mxs_chan->chan_irq;
> >> +
> >> +#ifdef CONFIG_SOC_IMX23
> >> +	if (cpu_is_mx23()&&  irq_num == MX23_INT_GPMI_DMA) {
> >> +		if (mxs_chan->chan.chan_id == MX23_DMA_GPMI0)
> >> +			return true;
> >> +		else
> >> +			return false;
> >> +	}
> >> +#endif
> >> +#ifdef CONFIG_SOC_IMX28
> >> +	if (cpu_is_mx28()&&  irq_num == MX28_INT_GPMI_DMA) {
> >> +		if (mxs_chan->chan.chan_id == MX28_DMA_GPMI0)
> >> +			return true;
> >> +		else
> >> +			return false;
> >> +	}
> >> +#endif
> >> +	return true;
> >> +}
> >>
> > You should make the distinction based on the platform_id, which would
> > save you the ugly ifdef's and cpu_is_... macros.
> >
> >
> This in the DMA driver.
> Do you want me to change the DMA driver to add the platform_id?
> The DMA driver has already used the cpu_is_xx() macros.
>
The mxs-dma driver is already using platform ids!


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________



More information about the linux-mtd mailing list