[ PATCH V2 3/7] MTD : add the database for the NANDs
Huang Shijie
b32955 at freescale.com
Sun Mar 27 22:00:34 EDT 2011
Hi Florian:
> Hello Huang,
>
> On Friday 25 March 2011 11:22:57 Huang Shijie wrote:
>> This is a new database for the NANDs which is searched by the id_bytes.
>>
>> Signed-off-by: Huang Shijie<b32955 at freescale.com>
>> ---
>> drivers/mtd/nand/nand_device_info.c | 154
>> +++++++++++++++++++++++++++++++++++ drivers/mtd/nand/nand_device_info.h |
>> 83 +++++++++++++++++++
>> 2 files changed, 237 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/mtd/nand/nand_device_info.c
>> create mode 100644 drivers/mtd/nand/nand_device_info.h
>>
>> diff --git a/drivers/mtd/nand/nand_device_info.c
>> b/drivers/mtd/nand/nand_device_info.c new file mode 100644
>> index 0000000..3ceec9c
>> --- /dev/null
>> +++ b/drivers/mtd/nand/nand_device_info.c
>> @@ -0,0 +1,154 @@
>> +/*
>> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
>> + */
>> +
>> +/*
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +#include<asm/sizes.h>
>> +#include<linux/mtd/nand.h>
>> +
>> +#include "nand_device_info.h"
>> +
>> +static const struct nand_device_info samsung_nand[] = {
>> + {
>> + .id = { 0xec, 0xd3, 0x14, 0x25, 0x64, 0xec, 0xd3, 0x14 },
>> + .id_len = 8,
>> + .desc = "K9G8G08U0M, K9HAG08U1M",
>> + .attr = ATTR(MLC, 1LL * SZ_1G, 128, 2 * SZ_1K + 64, 8, 512),
>> + }, {
>> + .id = { 0xec, 0xd7, 0xd5, 0x29, 0x38, 0x41, 0xec, 0xd7 },
>> + .id_len = 8,
>> + .desc = "K9LBG08U0D",
>> + .attr = ATTR(MLC, 4LL * SZ_1G, 128, 4 * SZ_1K + 218, 16, 512),
>> + }, {
>> + .id = { 0xec, 0xd5, 0x14, 0xb6, 0x74, 0xec, 0xd5, 0x14 },
>> + .id_len = 8,
>> + .desc = "K9GAG08U0M",
>> + .attr = ATTR(MLC, 2LL * SZ_1G, 128, 4 * SZ_1K + 218, 16, 512),
>> + }, {
>> + /* end of the table. */
>> + .id = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
>> + },
>> +};
> Sorry, but I do not see why this is still needed. drivers/mtd/nand_ids.c
> should already recognize all of these chips correctly. If this is not the case
> for you, you should fix nand_get_flash_type() instead.
>
These nands are only a example. I have other nands to add in future.
I will fix nand_get_flash_type() in future, not now. thanks
Btw : I forget to add the `busw` field in my nand_device_info{}.
>> +
>> +/* macro to get the id bytes */
>> +#define ID_GET_MFR_CODE(id) ((id)[0])
>> +
>> +void nand_device_print_info(struct nand_device_info *info)
>> +{
>> + unsigned i;
>> + const char *mfr_name;
>> + const char *cell_technology_name;
>> + uint64_t chip_size;
>> + const char *chip_size_units;
>> + unsigned page_size;
>> + unsigned oob_size;
>> + struct nand_attr *attr =&info->attr;
>> +
>> + /* Prepare the manufacturer name. */
>> + mfr_name = "Unknown";
>> + for (i = 0; nand_manuf_ids[i].id; i++) {
>> + if (nand_manuf_ids[i].id == ID_GET_MFR_CODE(info->id)) {
>> + mfr_name = nand_manuf_ids[i].name;
>> + break;
>> + }
>> + }
>> +
>> + /* Prepare the name of the cell technology. */
>> + switch (attr->cell_technology) {
>> + case SLC:
>> + cell_technology_name = "SLC";
>> + break;
>> + case MLC:
>> + cell_technology_name = "MLC";
>> + break;
>> + default:
>> + cell_technology_name = "Unknown";
>> + break;
>> + }
>> +
>> + /* Prepare the chip size. */
>> + if ((attr->chip_size_in_bytes>= SZ_1G)&&
>> + !(attr->chip_size_in_bytes % SZ_1G)) {
>> + chip_size = attr->chip_size_in_bytes / ((uint64_t) SZ_1G);
>> + chip_size_units = "GiB";
>> + } else if ((attr->chip_size_in_bytes>= SZ_1M)&&
>> + !(attr->chip_size_in_bytes % SZ_1M)) {
>> + chip_size = attr->chip_size_in_bytes / ((uint64_t) SZ_1M);
>> + chip_size_units = "MiB";
>> + } else {
>> + chip_size = attr->chip_size_in_bytes;
>> + chip_size_units = "B";
>> + }
>> +
>> + /* Prepare the page geometry. */
>> + page_size = (1<< (fls(attr->page_total_size_in_bytes) - 1));
>> + oob_size = attr->page_total_size_in_bytes - page_size;
>> +
>> + /* Print the infomation. */
>> + pr_info("--------------------------------------\n");
>> + pr_info(" NAND device infomation (RAW)\n");
>> + pr_info("--------------------------------------\n");
>> + pr_info("Manufacturer : %s (0x%02x)\n", mfr_name, info->id[0]);
>> + pr_info("Device Code : 0x%02x\n", info->id[1]);
>> + pr_info("Cell Technology : %s\n", cell_technology_name);
>> + pr_info("Chip Size : %llu %s\n", chip_size, chip_size_units);
>> + pr_info("Pages per Block : %u\n", attr->block_size_in_pages);
>> + pr_info("Page Geometry : %u+%u\n", page_size, oob_size);
>> + pr_info("ECC Strength : %u bits\n", attr->ecc_strength_in_bits);
>> + pr_info("ECC Size : %u B\n", attr->ecc_size_in_bytes);
>> + pr_info("Description : %s\n", info->desc);
>> +}
>> +
>> +static struct nand_device_info * __init
>> +search_table(const struct nand_device_info *table, const uint8_t id[])
>> +{
>> + struct nand_device_info *info = (struct nand_device_info *)table;
>> +
>> + while (ID_GET_MFR_CODE(info->id)) {
>> + int i;
>> +
>> + /* match all the valid id bytes. Is it too strict? */
>> + for (i = 0; i< info->id_len; i++)
>> + if (info->id[i] != id[i])
>> + break;
>> +
>> + /* found it */
>> + if (i == info->id_len)
>> + return info;
>> + info++;
>> + }
>> + return NULL;
>> +}
>> +
>> +struct nand_device_mfr_info {
>> + uint8_t id;
>> + const struct nand_device_info *table;
>> +};
>> +
>> +static const struct nand_device_mfr_info nand_device_mfr_directory[] = {
>> + { NAND_MFR_SAMSUNG, samsung_nand },
>> + { 0, NULL },
>> +};
>> +
>> +struct nand_device_info *nand_device_get_info(const uint8_t id[])
>> +{
>> + uint8_t mfr_id = ID_GET_MFR_CODE(id);
>> + unsigned i;
>> +
>> + for (i = 0; nand_device_mfr_directory[i].id; i++) {
>> + if (nand_device_mfr_directory[i].id == mfr_id) {
>> + const struct nand_device_info *table;
>> +
>> + table = nand_device_mfr_directory[i].table;
>> + return search_table(table, id);
>> + }
>> + }
>> + return NULL;
>> +}
>> diff --git a/drivers/mtd/nand/nand_device_info.h
>> b/drivers/mtd/nand/nand_device_info.h new file mode 100644
>> index 0000000..fe22233
>> --- /dev/null
>> +++ b/drivers/mtd/nand/nand_device_info.h
>> @@ -0,0 +1,83 @@
>> +/*
>> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
>> + */
>> +
>> +/*
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +#ifndef __DRIVERS_NAND_DEVICE_INFO_H
>> +#define __DRIVERS_NAND_DEVICE_INFO_H
>> +
>> +enum nand_device_cell_technology {
>> + SLC = 0,
>> + MLC = 1,
>> +};
>> +
>> +/**
>> + * @cell_technology: The storage cell technology.
>> + * @chip_size_in_bytes: The total size of the storage behind a
>> single + * chip select, in bytes. Notice that
>> this is *not* + * necessarily the total size
>> of the storage in a + * *package*, which may
>> contain several chips. + * @block_size_in_pages: The number of pages
>> in a block.
>> + * @page_total_size_in_bytes: The total size of a page, in bytes,
>> including + * both the data and the OOB.
>> + * @ecc_strength_in_bits: The strength of the ECC called for by the
>> + * manufacturer, in number of correctable
>> bits. + * @ecc_size_in_bytes: The size of the data block over
>> which the + * manufacturer calls for the given
>> ECC algorithm + * and strength.
>> + */
>> +struct nand_attr {
>> + /* Technology */
>> + enum nand_device_cell_technology cell_technology;
>> +
>> + /* Geometry */
>> + uint64_t chip_size_in_bytes;
>> + uint32_t block_size_in_pages;
>> + uint32_t page_total_size_in_bytes;
>> +
>> + /* ECC */
>> + uint16_t ecc_strength_in_bits;
>> + uint16_t ecc_size_in_bytes;
>> +};
>> +
>> +#define ID_BYTES (8)
>> +/*
>> + * struct nand_device_info - Information about a single NAND Flash device.
>> + *
>> + * This structure contains all the *essential* information about a NAND
>> Flash + * device, derived from the device's data sheet.
>> + */
>> +struct nand_device_info {
>> + /* id */
>> + uint8_t id[ID_BYTES];
>> + unsigned int id_len;
>> +
>> + /* Description */
>> + const char *desc;
>> +
>> + /* attribute*/
>> + struct nand_attr attr;
>> +};
>> +
>> +/* macro for the NAND attribute */
>> +#define ATTR(_a, _b, _c, _d, _e, _f) \
>> + { \
>> + .cell_technology = (_a), \
>> + .chip_size_in_bytes = (_b), \
>> + .block_size_in_pages = (_c), \
>> + .page_total_size_in_bytes = (_d), \
>> + .ecc_strength_in_bits = (_e), \
>> + .ecc_size_in_bytes = (_f), \
>> + }
>> +
>> +struct nand_device_info *nand_device_get_info(const uint8_t id_bytes[]);
>> +void nand_device_print_info(struct nand_device_info *info);
>> +
>> +#endif
Best Regards
Huang Shijie
More information about the linux-mtd
mailing list