[RFC PATCH] mtd: mxc_nand: fix OOB corruption when page size > 2k
Baruch Siach
baruch at tkos.co.il
Wed Mar 9 14:22:10 EST 2011
Hi Sascha,
On Wed, Mar 09, 2011 at 03:38:45PM +0100, Sascha Hauer wrote:
> On Wed, Mar 09, 2011 at 04:12:20PM +0200, Baruch Siach wrote:
> > When page size is 4k, ecc.total is set to 8*9, and this causes
> > nand_write_page_hwecc() to read past the initialized part of the eccpos array,
> > which corrupts chip->oob_poi with bogus values from ecc_calc.
> >
> > Fix this by creating a proper nand_ecclayout for 4k flashes.
> >
> > Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> > ---
> >
> > I'm not sure if this is the right fix. The proposed nandv2_hw_eccoob_4k is just
> > a natural extension of nandv2_hw_eccoob_largepage. However, I'm not convinced
> > that this actually matches the hardware behaviour. Anyway, this fixed a real
> > OOB corruption in BBT, which is the only place I know of where the OOB area is
> > actually used.
>
> Does this work on barebox aswell?
I haven't tested barebox yet. The trouble is that the eccpos field in struct
nand_ecclayout of barebox is still limited to 64 < 8*9. This has changed in
Linux since cc26c3cd (mtd: nand: expand nand_ecc_layout, deprecate ioctl
ECCGETLAYOUTmtd: nand: expand nand_ecc_layout, deprecate ioctl ECCGETLAYOUT).
That is why I had to upgrade .38 for this fix. The barebox NAND code needs an
update if we are to port this fix, assuming that this is the correct fix.
> If yes you could verify the oob layout
> by looking at md /dev/nand0_oob and verify that the ecc postitions
> specified in your patch match the ecc positions written from the
> hardware.
The current nandv2_hw_eccoob_largepage seem to match the documentation of
neither i.MX25 (RM §36.3.1, table 36-4), nor i.MX51 (RM §45.6.1, tables 45-8
and 45-9). This makes me unsure about my proposed fix. What is the source of
information for the nandv2_hw_eccoob_largepage layout?
baruch
> > Comments are welcome.
> >
> > drivers/mtd/nand/mxc_nand.c | 27 +++++++++++++++++++++++++++
> > 1 files changed, 27 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
> > index ef932ba..0fc80db 100644
> > --- a/drivers/mtd/nand/mxc_nand.c
> > +++ b/drivers/mtd/nand/mxc_nand.c
> > @@ -211,6 +211,31 @@ static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
> > }
> > };
> >
> > +/* OOB description for 4096 byte pages with 128 byte OOB */
> > +static struct nand_ecclayout nandv2_hw_eccoob_4k = {
> > + .eccbytes = 8 * 9,
> > + .eccpos = {
> > + 7, 8, 9, 10, 11, 12, 13, 14, 15,
> > + 23, 24, 25, 26, 27, 28, 29, 30, 31,
> > + 39, 40, 41, 42, 43, 44, 45, 46, 47,
> > + 55, 56, 57, 58, 59, 60, 61, 62, 63,
> > + 71, 72, 73, 74, 75, 76, 77, 78, 79,
> > + 87, 88, 89, 90, 91, 92, 93, 94, 95,
> > + 103, 104, 105, 106, 107, 108, 109, 110, 111,
> > + 119, 120, 121, 122, 123, 124, 125, 126, 127,
> > + },
> > + .oobfree = {
> > + {.offset = 2, .length = 4},
> > + {.offset = 16, .length = 7},
> > + {.offset = 32, .length = 7},
> > + {.offset = 48, .length = 7},
> > + {.offset = 64, .length = 7},
> > + {.offset = 80, .length = 7},
> > + {.offset = 96, .length = 7},
> > + {.offset = 112, .length = 7},
> > + }
> > +};
> > +
> > #ifdef CONFIG_MTD_PARTITIONS
> > static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
> > #endif
> > @@ -1186,6 +1211,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
> >
> > if (mtd->writesize == 2048)
> > this->ecc.layout = oob_largepage;
> > + if (nfc_is_v21() && mtd->writesize == 4096)
> > + this->ecc.layout = &nandv2_hw_eccoob_4k;
> >
> > /* second phase scan */
> > if (nand_scan_tail(mtd)) {
> > --
> > 1.7.2.3
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
More information about the linux-mtd
mailing list