[PATCH v5 2/3] ARM: mxs/mx23evk: add GPMI-NFC device
Huang Shijie
b32955 at freescale.com
Thu Jun 30 04:37:48 EDT 2011
Hi:
> On Thu, Jun 30, 2011 at 11:53:47AM +0800, Huang Shijie wrote:
>> add the GPMI-NFC device for mx23evk borad.
> s/borad/board/
>
>> Signed-off-by: Huang Shijie<b32955 at freescale.com>
>> ---
>> arch/arm/mach-mxs/Kconfig | 1 +
>> arch/arm/mach-mxs/mach-mx23evk.c | 37 +++++++++++++++++++++++++++++++++++++
>> 2 files changed, 38 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
>> index 1d3985f..f55bcfe 100644
>> --- a/arch/arm/mach-mxs/Kconfig
>> +++ b/arch/arm/mach-mxs/Kconfig
>> @@ -32,6 +32,7 @@ config MACH_MX23EVK
>> select SOC_IMX23
>> select MXS_HAVE_AMBA_DUART
>> select MXS_HAVE_PLATFORM_AUART
>> + select MXS_HAVE_PLATFORM_GPMI_NFC
>> select MXS_HAVE_PLATFORM_MXS_MMC
>> select MXS_HAVE_PLATFORM_MXSFB
>> help
>> diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
>> index 3c2de33..772b373 100644
>> --- a/arch/arm/mach-mxs/mach-mx23evk.c
>> +++ b/arch/arm/mach-mxs/mach-mx23evk.c
>> @@ -107,6 +107,42 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = {
>> (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
>> };
>>
>> +/* gpmi-nfc */
>> +#define MXS_PAD_GPMI_NFC (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
> Maybe put that into a more central place, as mach-mx28evk uses it, too?
yes. The mach-mx28evk needs it too.
If I put it into the iomux.h, what's the name for it?
MXS_PAD_CTRL_12MA , or something else ?
> OTOH the name sounds more generic than its use. Do you really need 12mA
Yes, I need the 12mA for the Write protect pin, and other two pins.
Best Regards
Huang Shijie
> for the Write protect pin? If not, you could rename it to
> MXS_PAD_GPMI_NFC_STROBE.
>
>> +static iomux_cfg_t mx23evk_gpmi_nfc_pads[] = {
>> + MX23_PAD_GPMI_D00__GPMI_D00 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D01__GPMI_D01 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D02__GPMI_D02 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D03__GPMI_D03 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D04__GPMI_D04 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D05__GPMI_D05 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D06__GPMI_D06 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D07__GPMI_D07 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_CLE__GPMI_CLE | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_ALE__GPMI_ALE | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_WPN__GPMI_WPN | MXS_PAD_GPMI_NFC,
>> + MX23_PAD_GPMI_WRN__GPMI_WRN | MXS_PAD_GPMI_NFC,
>> + MX23_PAD_GPMI_RDN__GPMI_RDN | MXS_PAD_GPMI_NFC,
>> + MX23_PAD_GPMI_RDY0__GPMI_RDY0 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_RDY1__GPMI_RDY1 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_CE0N__GPMI_CE0N | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_CE1N__GPMI_CE1N | MXS_PAD_CTRL,
>> +};
> Best regards
> Uwe
>
More information about the linux-mtd
mailing list